7M11: Difference between revisions

Revision as of 01:36, 21 August 2014

{{{manufacturer}}} Special Purpose
Dual Delay Line 7M11 front panel Compatible with [[7000-series scopes]] Produced from {{{introduced}}} to {{{discontinued}}} Manuals please add manual (All manuals in PDF format unless noted otherwise) [[Category:Introduced in {{{introduced}}}]]

Manuals – Specifications – Links – Pictures

The Tektronix 7M11 is a plug-in which contains two independent 50 Ohm analog delay lines with 75 ns each. Risetime is specified as 175 ps maximum, and attenuation is fixed at two.

A separate trigger output is available to eliminate an external power splitter. Signal through the trigger pick-off output is attenuated by a factor of five. Delay line connections are 50-ohm GR-874, trigger pickoff is through a BNC connector.

The maximum signal allowed is +/- 5V. The mass of the 7M11 about 2.5 kg, so be careful when sliding it into the slot. (Generally, Tektronix specifies not to ship mainframes with inserted plug-ins, to protect the bus connectors!)

Because it is completely passive and has no bus contacts, the 7M11 can be operated outside of the mainframe on the desk, freeing a slot for another plug-in.

Specifications

Key Specifications

Delay	75 ns (each channel)
Rise time	185 ps
Attenuation	2:1 (6 dB), main outputs / 5:1 (14 dB), trigger pick-off
Input voltage	+/- 5 V, max.
Weight	2.6 kg (!)

Links

7M11 page @ amplifier.cd

Pictures

Front
Right side
Connectors were changed to BNC of adequate quality

@@ Line 8: / Line 8: @@
 series=[[7000-series scopes]]|
 manuals=
+[[Category:Manual needed]]''please add manual''
 }}
@@ Line 44: / Line 44: @@
 [[Category:7000 series special-function plugins]]
-[[Category:Manual needed]]
+[[Category:Delay lines]]