5000 Series plug-in interface: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 17: | Line 17: | ||
! Function | ! Function | ||
! Function | ! Function | ||
|- | |- bgcolor="Pink" | ||
| 1 || | | 1 || +200 V || +38 V unreg | ||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
| 2 || Utility GND || +5 V | | 2 || Utility GND || +5 V | ||
Line 26: | Line 26: | ||
| 4 || Trig out (H) / Right trig in (V) || Left trig in (V) | | 4 || Trig out (H) / Right trig in (V) || Left trig in (V) | ||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
| 5 || | | 5 || +30 V || −30 V | ||
|- bgcolor="Pink" | |- bgcolor="Pink" | ||
| 6 || +15 V || −15 V | | 6 || +15 V || −15 V | ||
Line 38: | Line 38: | ||
| 10 || A gate || Z Axis B Sweep | | 10 || A gate || Z Axis B Sweep | ||
|- | |- | ||
| 11 || Sample pulse || Load stop | | 11 || Sample pulse ''[note 1]'' || Load stop ''[note 1]'' | ||
|- | |- | ||
| 12 || Single-sweep mode || | | 12 || Single-sweep mode || | ||
Line 58: | Line 58: | ||
| 20 || Chop activate || | | 20 || Chop activate || | ||
|- | |- | ||
| 21 || | | 21 || bgcolor="Pink" | −30 V || | ||
|- | |- bgcolor="LightGreen" | ||
| 22 || | | 22 || TS7 || TS10 | ||
|- | |- bgcolor="LightGreen" | ||
| 23 || | | 23 || TS5 || TS6 | ||
|- | |- bgcolor="LightGreen" | ||
| 24 || | | 24 || Ch. 2 Col || Ch. 2 Row / Sweep rate | ||
|- | |- bgcolor="LightGreen" | ||
| 25 || | | 25 || TS3 || TS2 | ||
|- | |- bgcolor="LightGreen" | ||
| 26 || | | 26 || TS8 || TS9 | ||
|- | |- bgcolor="LightGreen" | ||
| 27 || || | | 27 || TS1 || TS4 | ||
|- | |- bgcolor="LightGreen" | ||
| 28 || | | 28 || Ch. 1 Col || Ch. 1 Row | ||
|} | |} | ||
==Notes== | |||
* ''note 1'' − [[5223]] / [[5B25N]] | |||
===Pin group function legend=== | ===Pin group function legend=== |
Revision as of 11:13, 9 September 2018
Tektronix 5000 series oscilloscope mainframes have two vertical plug-in slots, and one horizontal plug-in slots.
The interconnect on either slot type is a 56-pin PCB edge connector.
Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top.
NotesPin group function legend
|