3T2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Although the manual says 2 ps, I believe that's a typo. The "Check Trigger Jitter" subsection of the "Performance Check" section makes it pretty clear that 20 ps is the spec.) |
||
| Line 21: | Line 21: | ||
UHF SYNC works up to 3 GHz. | UHF SYNC works up to 3 GHz. | ||
The amount of jitter depends on the mode of operation. | The amount of jitter depends on the mode of operation. | ||
The lowest jitter, specified to be less than | The lowest jitter, specified to be less than 20 ps, is obtained with | ||
an external 50 Ω trigger source of at least 150 mV. | an external 50 Ω trigger source of at least 150 mV. | ||
Revision as of 04:55, 23 June 2023
The Tektronix 3T2 is a sampling time-base plug-in for 560-series scopes.
Specifications
Triggering works up to 100 MHz. The 3T2 has a random sampling mode. UHF SYNC works up to 3 GHz. The amount of jitter depends on the mode of operation. The lowest jitter, specified to be less than 20 ps, is obtained with an external 50 Ω trigger source of at least 150 mV.
