O: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 16: Line 16:


* [[Media:tek_type_o_fcp.pdf|Tektronix Type O Factory Calibration Procedure (PDF, OCR)]]
* [[Media:tek_type_o_fcp.pdf|Tektronix Type O Factory Calibration Procedure (PDF, OCR)]]
* [[Media:tektronix_type_o_1968_cat.pdf|Tektronix Type O in 1968 Catalog (PDF, OCR)]]
}}
}}
The '''Tektronix Type O''' is a [[letter-series and 1-series plug-ins|letter-series plug-in]] that contains two op-amps.   
The '''Tektronix Type O''' is a [[letter-series and 1-series plug-ins|letter-series plug-in]] that contains two op-amps.   

Revision as of 12:22, 13 September 2018

Template:Plugin Sidebar 2 The Tektronix Type O is a letter-series plug-in that contains two op-amps.

The input and feedback networks of the op-amps can be configured from the front panel using knobs and/or user-supplied components. There are sockets on the front panel for banana plugs.

Type O also has a regular signal input that does not involve the op-amps. A mode switch selects which op-amp's output will be displayed, or the regular signal input.

Regular signal bandwidth is 25 MHz, maximum sensitivity is 50 mV/div, op-amp gain-bandwidth product is 15 MHz, and open-loop DC gain is 2500.

Type O was introduced in mid-1962 and was available through 1973.

The Type O can be used with any of the following adapters: 013-081, 013-068, 013-048, 013-0048-01, 013-0049-01, 013-0086-00, 013-0067-00 (manual below).

Pictures