468: Difference between revisions

Revision as of 07:36, 10 January 2022

Tektronix 468

10/100 MHz Digital Storage Scope

Produced from 1980 to 1985

Manuals

ROM Images

File	Pos.	Checksum

(All manuals in PDF format unless noted otherwise)

The Tektronix 468 is a digital/analog scope, essentially a 465B with an added 25 MS/s 8 bit digitizer. The 468 uses the 154-0731-00 CRT.

Bandwidth	100 MHz analog, 10 MHz digital repetitive, 2.5 MHz digital single-shot
Deflection	5 mV/Div to 5 V/Div, 1–2–5; CH1-CH2 cascaded – 1 mV/Div, 50 MHz
Time base	20 ns/Div to 50 ms/Div (B) or 500 ms/Div (A), 1–2–5, ×10 magnifier to 2 ns/Div
Sampling rate	25 MS/s
Resolution	8 bit
Input impedance	1 MΩ // 20 pF
Power	90–210 V, 108–132 V, 198–242 V or 216–250 V; 48–440 Hz
Dimensions	18.3 cm × 29.2 cm × 55 cm (H×W×D)
Weight	15 kg (33 lb)
Options	Opt.02 − GPIB (A17 board) Opt.05 − TV Sync Separator (A29 board) Opt.11 − Analog X-Y/Plotter Output (A27 board)

→ see 468/Repairs page

@@ Line 23: / Line 23: @@
 }}
 The '''Tektronix 468''' is a digital/analog scope, essentially a [[465B]] with an added 25 MS/s 8 bit digitizer.
+The 468 uses the [[154-0731-00]] CRT.
 {{BeginSpecs}}