Nicolet 526

From TekWiki
Revision as of 19:12, 11 November 2020 by Kurt (talk | contribs)
Jump to navigation Jump to search

The Nicolet 526 is a signal averager that was built into a modified OEMed Tektronix 5110 (5103N/D10) mainframe. The modifications performed by Nicolet include fan cooling via the bottom panel of the scope, and a 12-pin connector on the rear panel of the scope, connected to the interface board, connector J604.

The 12-pin rear-panel connector has its pins numbered on the inside of the connector.

Pin Function Comment
1
2
3
4
5
6
7
8
9
10 Ground
11
12