067-0532-01

From TekWiki
Revision as of 14:17, 10 March 2021 by Dgajanov (talk | contribs) (Categorized as a Calibration Fixture.)
Jump to navigation Jump to search
Tektronix 067-0532-01 Constant Amplitude Signal Generator

The Tektronix Type 067-0532-01 Calibration Fixture is a Constant Amplitude Signal Generator whose output is a low-distortion sinewave. It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.

A 3 MHz sinewave is available as a reference amplitude from which a -3 dB measurement can be made. The output connector, amplitude detector, and 50 Ω source resistor are at the end of a 42 inch cable. The amplitude is regulated at the end of the cable adjacent to the GR-874 output connector, thus essentially eliminating cable loss and standing-wave errors.

Key Specifications

     — Frequency
Range 65 MHz to 500 MHz
Accuracy Within 2% of indicated frequency
3 MHz Frequency Accuracy Within 5%
     — Amplitude
Range 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 V increments
Variable Continuously variable between calibrated steps. Max. output 4.2 V
3 MHz Amplitude Accuracy Within 2% of indicated amplitude
     — Constant Amplitude Accuracy
65 MHz to 300 MHz Within 2% of indicated amplitude
300 MHz to 500 MHz Within 5% of indicated amplitude
Output Source Impedance 50 Ω within 1%

Manuals

Pictures