067-0532-01

From TekWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Tektronix 067-0532-01
500 MHz Constant-Amplitude Signal Generator
Tektronix 067-0532-01 Constant Amplitude Signal Generator

Produced from 1971 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix Type 067-0532-01 Calibration Fixture is a constant amplitude signal generator whose output is a low-distortion sinewave.

It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.

A 3 MHz sinewave is available as a reference amplitude from which a –3 dB measurement can be made. The output connector, amplitude detector, and 50 Ω source resistor are situated at the end of a 42 inch cable. Output amplitude is regulated at the end of the cable adjacent to the GR-874 output connector, thus essentially eliminating cable loss and standing-wave errors.

Key Specifications

Frequency range 65 MHz to 500 MHz
Frequency accuracy ±2% of indicated frequency; 3 MHz output ±5%
Amplitude range 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 Vp-p increments; variable between calibrated steps; max. output 4.2 Vp-p
Amplitude accuracy 3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5%
Output 50 Ω ±1%, via GR-874 connector

Pictures