067-0587-10: Difference between revisions

Latest revision as of 21:13, 15 November 2023

Tektronix 067-0587-10
7000 Series Calibration Fixture 067-0587-10 Compatible with 7000-series scopes Produced from (?) to (?) Manuals 067-0587-10 Service Manual 067-0587-10 Instruction Manual see also 067-0587-02 manuals (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 067-0587-10 is a calibration fixture / signal standardizer for 7000-series scopes. It has the same performance specifications as the 067-0587-02 but is modified for compatibility with the 7612D.

In the 067-0587-10, the signal coming from the PRETRIG OUT generates one trigger for each staircase signal when used with the TEST switch in the GAIN position. The 067-0587-02 generates a pre-trigger signal on the PRETRIG OUT connector while in any mode.

Key Specifications

	— GAIN mode —
Staircase accuracy	±0.3% in ±3 Div, ±0.5% in ±4 Div, Linearity ±0.2% of 10 Div
	— STEP RESP mode —
Amplitude	2 to 10 Div
Position	Top at least ±5 Div from center of screen
Rise time	< 150 ps
Repetition rate	10 Hz to 1 MHz in decade steps, 0.1%
Pretrig Out	0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable)
	— FREQ RESP mode —
Input impedance	50 Ω
Input range	0.5 to 1 V_p-p
Flatness	± 3% from 3 MHz to 1 GHz

Pictures

067-0587-10 left side (cam switch assembly on bottom left)
067-0587-10 right side − note extra switch and resistor in top middle area of PCB that differentiates it from 067-0587-02
067-0587-10 with modified rear plastic interface to fit 11000-series scopes

Components

Some Parts Used in the 067-0587-10

Part	Part Number(s)	Class	Description	Used in
155-0160-00	155-0160-00	Monolithic integrated circuit	1.5 GHz trigger amplifier and source select	7B10 • 7B15 • 067-0587-02 • 067-0587-10
155-0175-00	155-0175-00 • 155-0175-05	Monolithic integrated circuit	broadband amplifier	7904A • 7912HB • 7934 • 7104 • R7103 • 7A29 • 7A29P • 7F10 • 067-0587-02 • 067-0587-10 • 11A71 • SCD1000 • EG&G N-AM-173A
155-0182-00	155-0182-00	Hybrid integrated circuit	Schottky diode shaper	067-0587-02 • 067-0587-10
155-0183-00	155-0183-00	Hybrid integrated circuit	Schottky diode detector	067-0587-02 • 067-0587-10

@@ Line 1: / Line 1: @@
-{{Plugin Sidebar 2 |
+{{Plugin Sidebar
-title=067-0587-10 |
+|manufacturer=Tektronix
-summary=Calibration Fixture |
+|type=067-0587-10
-image=Tek 067-0587-10.JPG |
+|summary=7000 Series Calibration Fixture
-caption=067-0587-10 |
+|image=Tek 067-0587-10.JPG
-series=[[7000-series scopes]] |
+|caption=067-0587-10
-introduced=(?) |
+|series=7000-series scopes
-discontinued=(?) |
+|introduced=(?)
-manuals=
+|discontinued=(?)
-* [http://w140.com/tek_067-0587-10_op.pdf 067-0587-10 Operator's Manual]
+|manuals=
-* [http://w140.com/tek_067-0587-10_service.pdf 067-0587-10 Service Manual]
+* [[Media:070-6178-00.pdf|067-0587-10 Service Manual]]
+* [[Media:070-6278-00.pdf|067-0587-10 Instruction Manual]]
+* see also [[067-0587-02]] manuals
 }}
-The '''Tektronix 067-0587-10''' is a Calibration fixture / signal standardizer for [[7000-series scopes]].
+The '''Tektronix 067-0587-10''' is a calibration fixture / signal standardizer for [[7000-series scopes]].
-It has the same performance specifications as the [[067-0587-02]] but is modified for
+It has the same performance specifications as the [[067-0587-02]] but is modified for compatibility with the [[7612D]].
-compatibility with the [[7612D]].
-In the [[067-0587-10]], the signal coming from the PRETRIG OUT generates one trigger for each
+In the [[067-0587-10]], the signal coming from the PRETRIG OUT generates one trigger for each staircase signal when used with the TEST switch in the GAIN position.
-staircase signal when used with the TEST switch in the GAIN position.  The [[067-0587-02]]
+The [[067-0587-02]] generates a pre-trigger signal on the PRETRIG OUT connector while in any mode.
-generates a pre-trigger signal on the PRETRIG OUT connector while in any mode.
-{{MissingSpecs}}
+{{BeginSpecs}}
+{{SpecGroup | GAIN mode }}
+{{Spec | Staircase accuracy | ±0.3% in ±3 Div, ±0.5% in ±4 Div, Linearity ±0.2% of 10 Div }}
+{{SpecGroup |  STEP RESP mode }}
+{{Spec | Amplitude | 2 to 10 Div }}
+{{Spec | Position  | Top at least ±5 Div from center of screen }}
+{{Spec | Rise time | < 150 ps}}
+{{Spec | Repetition rate | 10 Hz to 1 MHz in decade steps, 0.1%}}
+{{Spec | Pretrig Out | 0.5 V into 50 Ω, 55 to 95 ns lead time (internally variable) }}
+{{SpecGroup |  FREQ RESP mode }}
+{{Spec | Input impedance | 50 Ω }}
+{{Spec | Input range     | 0.5 to 1 V<sub>p-p</sub> }}
+{{Spec | Flatness | ± 3% from 3 MHz to 1 GHz }}
+{{EndSpecs}}
 ==Pictures==
 <gallery>
 Tek 067-0587-10.JPG
+Tek-067-0587-02 left.jpg   | 067-0587-10 left side (cam switch assembly on bottom left)
+Tek-067-0587-02 right.jpg  | 067-0587-10 right side − note extra switch and resistor in top middle area of PCB that differentiates it from [[067-0587-02]]
+-0587-10_11k_mod_rear.jpg | 067-0587-10 with modified rear plastic interface to fit [[11000-series scopes]]
 </gallery>
+==Components==
+{{Parts|067-0587-10}}
-[[Category:7000 series special-function plugins]]
+[[Category:7000 series test and calibration plugins]]
-[[Category:Calibration fixtures]]