1000-P1

From TekWiki
Revision as of 13:22, 24 December 2023 by Jadney (talk | contribs) (Created page with "The '''General Radio 1000-P1''' is a 50 Ω, 1 W, Inline Terminator with GR-874 connectors. It appears to be a very early version, probably with limited bandwidth, made in a GR-874X Insertion Unit but with a continuous center conductor. The outer sleeve is fixed in place by a single screw, and both ends of the sleeve are slotted and bent slightly inwards to provide good electrical contact between the sleeve and body. The wire-on-mica resistor limits the bandwidt...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The General Radio 1000-P1 is a 50 Ω, 1 W, Inline Terminator with GR-874 connectors. It appears to be a very early version, probably with limited bandwidth, made in a GR-874X Insertion Unit but with a continuous center conductor. The outer sleeve is fixed in place by a single screw, and both ends of the sleeve are slotted and bent slightly inwards to provide good electrical contact between the sleeve and body. The wire-on-mica resistor limits the bandwidth, but this was superseded by a shorter inline terminator with a central resistive disk. I have not found either version in any General Radio catalog.

See the Tektronix 017-0047-00

Pictures

  • 1000-P1, Front View

    1000-P1, Front View

  • 1000-P1, Rear View

    1000-P1, Rear View

  • 1000-P1, Opened

    1000-P1, Opened

Retrieved from "https://w140.com/tekwiki/index.php?title=1000-P1&oldid=90171"