106: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[ | {{Instrument Sidebar | ||
|manufacturer=Tektronix | |||
|model=106 | |||
|class= | |||
|series=Pulse generator | |||
|summary=Pulse generator | |||
|image=Tek 106 front2.jpg | |||
|caption=Tektronix 106 | |||
|introduced=1966 | |||
|discontinued=(?) | |||
|designers= | |||
|manuals= | |||
* [https://w140.com/tek_106.pdf Tektronix 106 Manual (PDF)] | |||
* [[Media:Tek 106 irb no ocr.pdf|Tektronix 106 Instrument Reference Book (PDF, needs OCR)]] | |||
* [[Media:Tek 106 design notes.pdf|Possible Tek 106 Design Notes (PDF)]] | |||
* [[Media:Tek 106 fcp jan 1967.pdf|Tektronix 106 Factory Calibration Procedure, January 1967]] | |||
* [[Media:Tek 106 fcp june 1969.pdf|Tektronix 106 Factory Calibration Procedure, June 1969]] | |||
}} | |||
The '''Tektronix Type 106''' is a square-wave generator [[introduced in 1966]]. It has four outputs: | The '''Tektronix Type 106''' is a square-wave generator [[introduced in 1966]]. It has four outputs: | ||
| Line 7: | Line 24: | ||
* '''Trigger Output:''' 100 mV into 50 Ω load, 50 ns rise time, 150 Ω output impedance, [[BNC connector]] | * '''Trigger Output:''' 100 mV into 50 Ω load, 50 ns rise time, 150 Ω output impedance, [[BNC connector]] | ||
The 1 ns rise-time outputs are generated using diodes to clip a high | The 1 ns rise-time outputs are generated using diodes to clip a high amplitude signal. In units with serial numbers less than 1190, GaAs diodes were used for clipping. | ||
amplitude signal. In units with serial numbers less than 1190, GaAs diodes | After serial number 1190, silicon diodes were used. | ||
were used for clipping. After serial number 1190, silicon diodes were used. | |||
The high amplitude output stage of the 106 is made of four [[7189|7189A]] tubes in parallel. | The high amplitude output stage of the 106 is made of four [[7189|7189A]] tubes in parallel. | ||
With moderate effort, the socket wiring can be made compatible with the [[7189]] aka [[6BQ5]]. | With moderate effort, the socket wiring can be made compatible with the [[7189]] aka [[6BQ5]]. | ||
==Pictures== | ==Pictures== | ||
| Line 43: | Line 51: | ||
[[Category:Pulse generators]] | [[Category:Pulse generators]] | ||
[[Category:GR874]] | [[Category:GR874]] | ||
Revision as of 11:10, 18 August 2021
The Tektronix Type 106 is a square-wave generator introduced in 1966. It has four outputs:
- Fast Rise +Output: 500 mV into 50 Ω load, positive-going pulse, 1 ns rise time, 50 Ω output impedance, GR-874 connector
- Fast Rise −Output: 500 mV into 50 Ω load, negative-going pulse, 1 ns rise time, 50 Ω output impedance, GR-874 connector
- High Amplitude Output: 12 V into 50 Ω load, 12 ns rise time, 600 Ω output impedance, GR-874 connector
- Trigger Output: 100 mV into 50 Ω load, 50 ns rise time, 150 Ω output impedance, BNC connector
The 1 ns rise-time outputs are generated using diodes to clip a high amplitude signal. In units with serial numbers less than 1190, GaAs diodes were used for clipping. After serial number 1190, silicon diodes were used.
The high amplitude output stage of the 106 is made of four 7189A tubes in parallel. With moderate effort, the socket wiring can be made compatible with the 7189 aka 6BQ5.
Pictures
-
Front
-
-
Outputs
-
Rear
-
Schematic
-
Silicon Diode Conversion
-
106 pulse on 2235
-
-
-
Power Supply with Component Locations
-
-
-
-
-
-
