112

From TekWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Tektronix 112
Differential amplifier
Tek 112 front

Produced from 1949 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix 112 is a DC-coupled differential amplifier introduced in 1949.

The 112 is intended for use with the 511, 512, 514, and 524 oscilloscopes.

Key Specifications

Amplification 0.5 to 5000 V/V
Bandwidth DC to 2 MHz @ gain < 166; DC to 1 MHz above
Input impedance 1 MΩ // 47 pF
Output impedance 8 kΩ

Internals

The amplifier's schematic and response are identical to that of a Tek 512.

The first stage is a differential amplifier using a pair of 5879 pentodes. Next is a differential amplifier using a pair of 12AU6 pentodes.

The 112 has a differential output intended for directly driving the vertical deflection plates of a CRT. The output terminals of the 112 are on the right side in the rear, so the 112 can sit to the left of an oscilloscope and short wires can connect the 112 to the oscilloscope's CRT.

A two-position switch on the rear panel of the Type 112 controls the common-mode output voltage. In one position, the common-mode output voltage is +150 V, which is the plate voltage of the 6AG7 tubes of the output amplifier. In the other position, the common-mode output voltage is 0 V.

The shifting of the common-mode output voltage 150 V downward is accomplished by enabling a pair of 680 μA DC current sinks that cause a voltage drop on 220 kΩ series output resistors. 6CB6 pentodes form the current sinks, with their cathodes tied to -150 V. The 220 kΩ output resistors also provide short circuit protection.

The Type 112 manual recommends 0 V for driving the CRT of the 511, and +150 V for driving the CRT of the 512, 513, or 514.

See Also

Prices

  • 1949: $495 (~ $6,300 in 2023 dollars)

Pictures

Components

Some Parts Used in the 112

Part Part Number(s) Class Description Used in
12AU6 154-0040-00 Vacuum Tube (Pentode) RF pentode 81 112 1L10 1L20 1L60 3L10 512 556 575 545 547 549 581 585 A B C G K H L ML M N O R S Z
5879 154-0055-00 Vacuum Tube (Pentode) sharp-cutoff pentode 112 512 D E Hickok 1825
6AG7 154-012 154-0012-00 Vacuum Tube (Pentode) 9 Watt power pentode 104 104A 105 112 511 511A 512 513 514 517 517A 524
6CB6A 154-0030-00 Vacuum Tube (Pentode) pentode 105 112 316 317 503 504 513 517 517A 541 535 545 63 2A63