133: Difference between revisions
No edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
Tek 1a7 in 133 2.jpg|133 housing a [[1A7]] | Tek 1a7 in 133 2.jpg|133 housing a [[1A7]] | ||
Tek 1a7 in 133 3.jpg|133 housing a [[1A7]] | Tek 1a7 in 133 3.jpg|133 housing a [[1A7]] | ||
Tek 133 ps schem.png|Power supply schematic | |||
Tek 133 plug-in connector and sync.png|Plug-in connector and sync schematic | |||
Tek 133 amplifier.png|Amplifier schematic | |||
</gallery> | </gallery> | ||
Revision as of 14:43, 13 June 2017
The Tektronix 133 is an external enclosure and power supply for a letter-series or 1-series plug-in. It was introduced in 1961. The enclosure supplies power to the plug-in and the outputs from the plug-in are available. The bandwidth of the 133's outputs is 100 kHz, which is much slower than the 16 MHz bandwidth of the 132. However, the 133 has a 2 Ω output impedance compared to 5 kΩ for the 132, and the 133 can drive 1.5 amperes at its output, versus a maximum of 10 mA for the 132.
-
front view
-
front inside
-
right view
-
top view
-
left view shows power supply and TO-3 output power transistors
-
bottom view shows solid state rectifiers and capacitors for low-voltage high-current output amplifier
-
-
133 housing a 1A7
-
133 housing a 1A7
-
133 housing a 1A7
-
Power supply schematic
-
Plug-in connector and sync schematic
-
Amplifier schematic
