155-0011-00

From TekWiki
Revision as of 01:40, 26 July 2018 by Peter (talk | contribs)
Jump to navigation Jump to search

The Tektronix 155-0011-00 (M012) is a Tek-made clock and chop blanking chip in a 16-pin DIP, designed by Les Larson.

It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.

Used in

Datasheet