180: Difference between revisions

From TekWiki
Jump to navigation Jump to search
m (Photos)
m (Photos)
Line 35: Line 35:
Tek 180A front.jpg | Tel 180A Front Panel #1
Tek 180A front.jpg | Tel 180A Front Panel #1
Tek_180_Front.jpg | Tek 180A Front Panel #2
Tek_180_Front.jpg | Tek 180A Front Panel #2
Tek_180A_On.jpg | Tek 180A Front Panel #3
Tek_180A-1.jpg | Tek 180A Front
Tek_180A-1.jpg | Tek 180A Front
Tek_180A-2.jpg | Tek 180A Front
Tek_180A-2.jpg | Tek 180A Front
Line 54: Line 55:
Tek_180A-Switches.jpg | Tek 180A Internal - Switches
Tek_180A-Switches.jpg | Tek 180A Internal - Switches
Tek_180A_Underside.jpg | Tek 180A Under Chassis w/o Cover
Tek_180A_Underside.jpg | Tek 180A Under Chassis w/o Cover
Tek_180A_Inside_Tubes.jpg | Tek 180A Internal Tubes Live
Tek 180a-rm 1.jpg|180A-RM in black
Tek 180a-rm 1.jpg|180A-RM in black
Tek 180a-rm 2.jpg|180A-RM in black
Tek 180a-rm 2.jpg|180A-RM in black

Revision as of 02:15, 23 November 2018

The Tektronix 180A was introduced in 1958 and is an all tube time mark generator with an oven-controlled crystal oscillator (OCXO). Time mark generators put out pulses at user-selectable intervals. They are primarily used for calibrating the time-base of oscilloscopes.

The signal path of the 180A starts with the OCXO, which produces 1 MHz. That waveform is divided down using synchronized monostable multivibrators. Switches on the front panel select which of the divided-down pulse signals will be added together to form the output waveform. This scheme does not require precision in the time constant of the monostable multivibrators. The only precision component in the 180A is the OCXO (part number 158-007).

In addition to the time mark generator functionality, the 180A also produces sine waveforms at 5 MHz, 10 MHz, and 50 MHz. These frequencies are produced by feeding the 1 MHz OCXO output to a series of three frequency multipliers. First the 1 MHz is quintupled to get the 5 MHz signal. Then the 5 MHz signal is doubled to the the 10 MHz signal. Then the 10 MHz signal is quintupled, yielding the 50 MHz signal. Each of the three frequency multipliers is composed of a 6DK6 pentode driving an LC resonator tuned to 5 MHZ, 10 MHZ, and 50 MHz.

The 180A manual suggests an interesting procedure for calibrating the OCXO, by attaching a small antenna to deliberately interfere with the national time standard broadcast, and observing the interference with a communication receiver.

The Tektronix 180 has toggle switches. The 180A has pushbutton switches.

The 180A, serial number 5599 and up, uses the 120-119 power transformer.