191: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
voltage regulator that supplies power to the oscillator. The calibration procedure in the manual makes use | voltage regulator that supplies power to the oscillator. The calibration procedure in the manual makes use | ||
of a [[661]] to accurately view the output waveform. | of a [[661]] to accurately view the output waveform. | ||
* [http://w140.com/mmm/tek-191.pdf Tektronix 191 Manual (PDF)] | |||
<gallery> | <gallery> | ||
Revision as of 20:40, 16 February 2012
The Tektronix Type 191 Constant Amplitude Signal Generator is a sine wave source introduced in 1966. It covers frequencies from 350 kHz to 100 MHz in seven bands. The output amplitude can be adjusted in calibrated steps from 5 mV to 5 V in three ranges. The oscillator is an Colpitts oscillator using a 7119 tube. A peak-to-peak detector made with two GaAs diodes measures the swing of the oscillator and produces a DC feedback signal that controls a series voltage regulator that supplies power to the oscillator. The calibration procedure in the manual makes use of a 661 to accurately view the output waveform.
-
Front view
-
Top internal view
-
Bottom internal view
-
Left internal view
-
Right internal view
-
Rear view
-
Schematic
