1A2: Difference between revisions

From TekWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 1: Line 1:
The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes.  It provides a -3dB point of
The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes.  It provides a -3dB point of
50MHz in a 544, 546, or 547, and 50mV/div sensitivity.  It uses a 7586 nuvistor at the front end as a cathode follower.
50MHz in a 544, 546, or 547, and 50mV/div sensitivity.  It uses a [[7586]] [[nuvistor]] at the front end as a cathode follower.
Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at  
Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at  
the collectors.  Silicon diodes form an analog multiplexer that switches between the two inputs.
the collectors.  Silicon diodes form an analog multiplexer that switches between the two inputs.
Line 6: Line 6:
the diodes that select the input channel.
the diodes that select the input channel.


Type 1A2 was introduced in 1964 together with Types [[1A1]], [[543B]], [[545|545B]], [[544]], [[546]], and [[547]].
Type 1A2 was [[introduced in 1964]] together with Types [[1A1]], [[543B]], [[545|545B]], [[544]], [[546]], and [[547]].
It was designed to replace the venerable Type [[CA]], while the Type [[1A1]] delivered
It was designed to replace the venerable Type [[CA]], while the Type [[1A1]] delivered
ten times the sensitivity at a higher price and is able to lock channel 1 to Type [[547]]'s timebase A
ten times the sensitivity at a higher price and is able to lock channel 1 to Type [[547]]'s timebase A

Revision as of 18:06, 30 September 2010

The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes. It provides a -3dB point of 50MHz in a 544, 546, or 547, and 50mV/div sensitivity. It uses a 7586 nuvistor at the front end as a cathode follower. Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors. Silicon diodes form an analog multiplexer that switches between the two inputs. A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.

Type 1A2 was introduced in 1964 together with Types 1A1, 543B, 545B, 544, 546, and 547. It was designed to replace the venerable Type CA, while the Type 1A1 delivered ten times the sensitivity at a higher price and is able to lock channel 1 to Type 547's timebase A and channel 2 to timebase B. On the other hand, Type 1A2 can select which channel provides triggering when the mainframe is set to Plug-In mode. They share some mechanical design, but the circuits have few details in common.

Type 1A2 remained available until the classic plugin scope line was discontinued after 1974.