1A2: Difference between revisions

From TekWiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
(8 intermediate revisions by 3 users not shown)
Line 9: Line 9:
manuals=
manuals=
* [http://w140.com/mmm/tek-1a2.pdf Tektronix 1A2 Manual (PDF)]
* [http://w140.com/mmm/tek-1a2.pdf Tektronix 1A2 Manual (PDF)]
* [[Media:070-0430-01.pdf|Tektronix 1A2 Manual (PDF, OCR, bad-OCR)]]
* [[Media:Tek 1a2 notes.pdf|Tektronix 1A2 Notes (PDF, needs OCR)]]
}}
}}


The '''Tektronix 1A2''' is a two-channel plug-in amplifier for [[500-series scopes]]. It provides a -3 dB point of
The '''Tektronix 1A2''' is a two-channel plug-in amplifier for [[500-series scopes]].
50 MHz in a [[544]], [[546]], or [[547]], and 50 mV/div sensitivity.   
It provides a −3 dB point of 50 MHz in a [[544]], [[546]], [[547]], or [[556]], and 50 mV/div sensitivity.   


The Type 1A2 was [[introduced in 1964]] together with Types [[1A1]], [[543|543B]], [[545|545B]], [[544]], [[546]], and [[547]]. It was designed to replace the venerable [[CA|Type CA]], while the [[1A1]] delivered
The Type 1A2 was [[introduced in 1964]] together with Types [[1A1]], [[543|543B]], [[545|545B]], [[544]], [[546]], and [[547]].
It was designed to replace the venerable [[CA|Type CA]], while the [[1A1]] delivered
ten times the sensitivity at a higher price and is able to lock channel 1 to Type [[547]]'s timebase A
ten times the sensitivity at a higher price and is able to lock channel 1 to Type [[547]]'s timebase A
and channel 2 to timebase B.  On the other hand, Type 1A2 can select which channel provides triggering
and channel 2 to timebase B.  On the other hand, Type 1A2 can select which channel provides triggering
when the mainframe is set to Plug-In mode.  They share some mechanical design, but the
when the mainframe is set to Plug-In mode, for scopes having this feature ([[544]], [[546]], [[547]], [[549]], [[556]], late [[555]]).   
circuits have few details in common.


The 1A2 remained available until the [[500-series scopes|500-series scope line]] was discontinued.
The 1A2 remained available until the [[500-series scopes|500-series scope line]] was discontinued.


The 1A2 uses a [[7586]] [[nuvistor]] at the front end as a cathode follower. Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors.  Silicon diodes form an analog multiplexer that switches between the two inputs. A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.
{{MissingSpecs}}
 
==Internals==
1A1 and 1A2 share some mechanical design, but the circuits have few details in common.
 
The 1A2 uses a [[7586]] [[nuvistor]] at the front end as a cathode follower.
Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors.


==Specifications==
Silicon diodes form an analog multiplexer that switches between the two inputs.
[[Category:Specifications needed]] ''please add''
A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.


==Pictures==
==Pictures==
Line 31: Line 40:
<gallery>
<gallery>
Tek 1a2 new.jpg
Tek 1a2 new.jpg
Image:Tek 1a2 front.jpg
Tek 1a2 front.jpg
Image:Tek 1a2 top.jpg
Tek 1a2 top.jpg
Image:Tek 1a2 rear.jpg
Tek 1a2 rear.jpg
Tek 1a2 left.jpg|1A2 right
Tek 1a2 left.jpg|1A2 right
Tek 1a2 right.jpg|1A2 left
Tek 1a2 right.jpg|1A2 left
Line 41: Line 50:
Tek 1a2 front2.jpg
Tek 1a2 front2.jpg
Tek 1a2 front3.jpg
Tek 1a2 front3.jpg
Tek 1a2 b1.jpg
Tek 1a2 b2.jpg
Tek 1a2 b3.jpg
Tek 1a2 b4.jpg
Tek 1a2 b5.jpg
</gallery>
</gallery>


[[Category:500 series plugins]]
[[Category:500 series plugins]]

Revision as of 18:25, 14 June 2019

Template:Plugin Sidebar 2

The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes. It provides a −3 dB point of 50 MHz in a 544, 546, 547, or 556, and 50 mV/div sensitivity.

The Type 1A2 was introduced in 1964 together with Types 1A1, 543B, 545B, 544, 546, and 547. It was designed to replace the venerable Type CA, while the 1A1 delivered ten times the sensitivity at a higher price and is able to lock channel 1 to Type 547's timebase A and channel 2 to timebase B. On the other hand, Type 1A2 can select which channel provides triggering when the mainframe is set to Plug-In mode, for scopes having this feature (544, 546, 547, 549, 556, late 555).

The 1A2 remained available until the 500-series scope line was discontinued.

Key Specifications

  • please add

Internals

1A1 and 1A2 share some mechanical design, but the circuits have few details in common.

The 1A2 uses a 7586 nuvistor at the front end as a cathode follower. Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors.

Silicon diodes form an analog multiplexer that switches between the two inputs. A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.

Pictures