Difference between revisions of "1A2"

From TekWiki
Jump to: navigation, search
m (fix link)
m
Line 12: Line 12:
 
when the mainframe is set to Plug-In mode.  They share some mechanical design, but the
 
when the mainframe is set to Plug-In mode.  They share some mechanical design, but the
 
circuits have few details in common.
 
circuits have few details in common.
 +
 +
Type 1A2 remained available until the classic plugin scope line was discontinued after 1974.

Revision as of 16:09, 27 September 2010

The Tektronix 1A2 is a two-channel plug-in amplifier for 500-series scopes. It provides a -3dB point of 50MHz in a 544, 546, or 547, and 50mV/div sensitivity. It uses a 7586 nuvistor at the front end as a cathode follower. Then one input of an NPN differential amplifier is driven to produce a differential current-mode signal at the collectors. Silicon diodes form an analog multiplexer that switches between the two inputs. A cross-coupled pair of PNP transistors forms a multivibrator that generates the voltages that control the diodes that select the input channel.

Type 1A2 was introduced in 1964 together with Types 1A1, 543B, 545B, 544, 546, and 547. It was designed to replace the venerable Type CA, while the Type 1A1 delivered ten times the sensitivity at a higher price and is able to lock channel 1 to Type 547's timebase A and channel 2 to timebase B. On the other hand, Type 1A2 can select which channel provides triggering when the mainframe is set to Plug-In mode. They share some mechanical design, but the circuits have few details in common.

Type 1A2 remained available until the classic plugin scope line was discontinued after 1974.