1A5: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The Type 1A5 is a differential amplifier plug-in for [[500-series scopes]].  Bandwidth is 50MHz down to 5mV/div.  The maximum differential sensitivity is 1mV/div, with a bandwidth of 40MHz.  Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20MHz.  Like most Tektronix differential plug-ins, it has three modes: Va-Vc, Va-Vb, and Vc-Vb.  Vc is controlled by a ten-turn pot and can vary from -5V to +5V (0.5V on the 5V/div to 20V/div ranges).  There is a front-panel jack for direct connection of the Type [[P6046]] Active Differential Probe.  Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the classic plugin scope line in 1974.
The Type 1A5 is a differential amplifier plug-in for [[500-series scopes]].  Bandwidth is 50MHz down to 5mV/div.  The maximum differential sensitivity is 1mV/div, with a bandwidth of 40MHz.  Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20MHz.  Like most Tektronix differential plug-ins, it has three modes: Va-Vc, Va-Vb, and Vc-Vb.  Vc is controlled by a ten-turn pot and can vary from -5V to +5V (0.5V on the 5V/div to 20V/div ranges).  There is a front-panel jack for direct connection of the Type [[P6046]] Active Differential Probe.  Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the classic plug-in scope line in 1974.


* [http://manoman.sqhill.com/pdf/tek-1a5.pdf Tektronix 1A5 Manual (PDF)]
* [http://w140.com/mmm/tek-1a5.pdf Tektronix 1A5 Manual (PDF)]


<gallery>
<gallery>

Revision as of 21:13, 10 December 2011

The Type 1A5 is a differential amplifier plug-in for 500-series scopes. Bandwidth is 50MHz down to 5mV/div. The maximum differential sensitivity is 1mV/div, with a bandwidth of 40MHz. Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20MHz. Like most Tektronix differential plug-ins, it has three modes: Va-Vc, Va-Vb, and Vc-Vb. Vc is controlled by a ten-turn pot and can vary from -5V to +5V (0.5V on the 5V/div to 20V/div ranges). There is a front-panel jack for direct connection of the Type P6046 Active Differential Probe. Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the classic plug-in scope line in 1974.