1A5: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 16: Line 16:
Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the 500-series scope line.
Type 1A5 was [[introduced in 1967]], replacing Types [[W]] and [[Z]], and lasted until the end of the 500-series scope line.


==Specifications==
{{BeginSpecs}}
Bandwidth is 50 MHz down to 5 mV/div.
{{Spec | Bandwidth | 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div }}
The maximum differential sensitivity is 1 mV/div, with a bandwidth of 40 MHz.
{{Spec | Deflection | 1 mV/div to 20 V/div, 1−2−5 }}
Common-mode rejection is 20,000 to 1 at low frequencies, deteriorating to 200:1 at 20 MHz
{{Spec | Common-mode rejection | 20,000:1 at low frequencies, deteriorating to 200:1 at 20 MHz }}
{{EndSpecs}}


Like most Tektronix differential plug-ins, it has three modes:  
Like most Tektronix differential plug-ins, the 1A5 has three modes:  
V<sub>A</sub>-V<sub>C</sub>, V<sub>A</sub>-V<sub>B</sub>, and V<sub>C</sub>-V<sub>B</sub>.
V<sub>A</sub>−V<sub>C</sub>, V<sub>A</sub>−V<sub>B</sub>, and V<sub>C</sub>−V<sub>B</sub>.
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from -5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).   
 
V<sub>C</sub> is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).   


[[Category:Specifications needed]]''please add''
[[Category:Specifications needed]]''please add''

Revision as of 11:24, 25 September 2018

Template:Plugin Sidebar 2 The Tektronix Type 1A5 is a differential amplifier plug-in for 500-series scopes.

It has an Amphenol 165 series connector on the front panel for direct connection of the Type P6046 Active Differential Probe.

Type 1A5 was introduced in 1967, replacing Types W and Z, and lasted until the end of the 500-series scope line.

Key Specifications

Bandwidth 50 MHz down to 5 mV/div, 40 MHz at 1 mV/div
Deflection 1 mV/div to 20 V/div, 1−2−5
Common-mode rejection 20,000:1 at low frequencies, deteriorating to 200:1 at 20 MHz

Like most Tektronix differential plug-ins, the 1A5 has three modes: VA−VC, VA−VB, and VC−VB.

VC is controlled by a ten-turn potentiometer and can vary from −5 V to +5 V (0.5 V on the 5 V/div to 20 V/div ranges).please add

Pictures