1S2: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
m (correct discontinuation year based on price list from 1972 new products catalog)
Line 5: Line 5:
caption=1S2 front view|
caption=1S2 front view|
introduced=1967 |
introduced=1967 |
discontinued=1972 |
discontinued=1973 |
series=[[500-series scopes]]|
series=[[500-series scopes]]|
manuals=
manuals=
Line 24: Line 24:
Waveform output can be to the CRT of the mainframe and/or to a plotter or low-speed data acquisition device via banana connectors on the front of the 1S2.   
Waveform output can be to the CRT of the mainframe and/or to a plotter or low-speed data acquisition device via banana connectors on the front of the 1S2.   


The 1S2 was [[introduced in 1967]] and was sold through 1971 or 1972.
The 1S2 was [[introduced in 1967]] and was sold through 1972.


==Links==
==Links==

Revision as of 17:27, 1 August 2017

Template:Plugin Sidebar 2 The Tektronix 1S2 is a sampling/TDR plug-in for 500-series scopes. Like the 1S1, it is a complete sampling subsystem and uses the mainframe merely as a power supply and low-speed display.

Unlike the 1S1, it contains pulsers that allows it to perform time-domain reflectometry (TDR) measurements. The 1S2 has two 50 Ω pulsers, one of which is active at a time. One puts out a 250 mV pulse with 50 ps rise time. The other puts out a slower 1 V pulse. The sampling bridge is a feed-through type.

For TDR measurements, the signal from one of the internal pulsers is fed through the sampler, and out to the the transmission line being tested. Returning pulses are detected as they pass back through the sampler, and they are reabsorbed by the 50 Ω impedance of the pulser.

Waveform output can be to the CRT of the mainframe and/or to a plotter or low-speed data acquisition device via banana connectors on the front of the 1S2.

The 1S2 was introduced in 1967 and was sold through 1972.

Links

Pictures