2212: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(14 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar|
{{Oscilloscope Sidebar|
title=Tektronix 2212|
title=Tektronix 2212|
image=Image needed.jpg|
image=Tek 2212 front.jpg|
caption=Tektronix 2212 image needed|
caption=Tektronix 2212 front |
years=? — ?|
introduced=1993 |
discontinued=1995 |
summary=60 MHz dual channel analog/digital oscilloscope|
summary=60 MHz dual channel analog/digital oscilloscope|
manuals=
manuals=
* [http://w140.com/Tek_2212_User_Manual.pdf Tektronix 2212 User Manual (PDF)]
* [http://w140.com/Tek_2212_User_Manual.pdf Tektronix 2212 User Manual (PDF)]
* [http://w140.com/Tek_2212_Service_Manual_Sections_1-8.pdf Tektronix 2212 Service Manual without schematics (PDF)]
* [http://w140.com/Tek_2212_Service_Manual_Sections_1-8.pdf Tektronix 2212 Service Manual without schematics (PDF)]
* [[list of manuals that are needed|Manual with schematics needed]]
}}
}}
The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen cursors. It has a switch which selects between the two modes.  In analog mode, the vertical signal path is all analog, from the BNC input connector to the electrostatic deflection plates of the CRT.  
The '''Tektronix 2212''' is a portable mixed analog/digital storage oscilloscope with on-screen cursors.
The [[2216]] is the 4-channel version.


Other signals such as the trigger level are controlled by the internal computer in both modes. In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms.  The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz.  The bandwidth in digital mode is considerably lower.  There is a DB-25 connector on the rear panel for connecting a parallel-port printer.  It prints correctly to an Epson-compatible printer and allows some customization of what is on the screenThe 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates.
The 2212 has two modes, analog and digital.
In analog mode, the vertical signal path is all analog,
from the BNC input connector to the electrostatic deflection plates of the CRT.  
In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms.   
Other signals such as the trigger level are controlled by the internal computer in both modes.   


[[list of manuals that are needed|Manual needed]]. (schematics)
The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz.
Bandwidth in digital mode is considerably lower (20 MHz)


==Specifications==
There is a DB-25 connector on the rear panel for connecting a parallel-port printer.
* Bandwidth: 60 MHz (non-storage), 10 MHz (storage)
It prints correctly to an Epson-compatible printer and allows some customization of what is on the screen.
* Sampling Rate:
The 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates.
* ADC resolution: 8 bit
* Memory: 4096 Samples


* Deflection: 5 mV/Div – 5 V/Div in 1–2–5 sequence, 2 mV/Div bandwidth limited to 10 MHz
{{BeginSpecs}}
* Input impedance: 1 MΩ || 20 pF
{{Spec | Bandwidth | 60 MHz (non-storage), 10 MHz (storage) }}
 
{{Spec | Sampling rate | 20 MS/s max. }}
* InterfacesParallel printer port (DB25), RS232C (optional), GPIB (optional)
{{Spec | Deflection | 2 mV/Div to 10 V/Div (2 mV/Div bandwidth limited to 10 MHz) }}
 
{{Spec | Resolution | 8 bits }}
* Power: 85 W max.
{{Spec | Memory | 4 k samples per channel (Opt. 1M: 128k), can store two waveforms }}
{{Spec | Input impedance | 1 MΩ // 20 pF }}
{{Spec | Features |
* On-screen readout and cursors
* X-Y store and non-store operation
* Store front-panel setup in nonvolatile memory
}}
{{Spec | Options |
* 10: GPIB interface
* 12: RS-232 Interface
* 1M: memory expansion to 128k samples per channel
}}
{{Spec | Interfaces | Parallel printer port (DB25), RS232C (optional), GPIB (optional) }}
{{Spec | Power | 85 W max. }}
{{EndSpecs}}


==Links==
==Links==
Line 32: Line 52:
==Pictures==
==Pictures==


<gallery>
Tek 2212 front.jpg
Tek 2212 trace.jpg
Tek 2212 trace2.jpg
Tek 2212 controls.jpg
Tek 2212 trace3.jpg
Tek 2212 front w probes.jpg
Tek 2212 rear.jpg
Tek 2212 startup.jpg
Tek 2212 cf1.jpg
Tek 2212 cf2.jpg
Tek 2212 cf3.jpg
</gallery>


[[Category:CRT based solid-state scopes]]
[[Category:2200 series scopes]]
[[Category:Digital storage scopes]]
[[Category:Digital storage scopes]]
 
[[Category:Parallel printer interface]]
 
[[Category:RS-232 interface]]
 
[[Category:GPIB interface]]
[[Category:Manual needed]]
[[Category:Image needed]]

Revision as of 10:09, 27 February 2018

{{{manufacturer}}} 
60 MHz dual channel analog/digital oscilloscope
Tektronix 2212 front

Produced from 1993 to 1995

Manuals
Manuals – Specifications – Links – Pictures

The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen cursors. The 2216 is the 4-channel version.

The 2212 has two modes, analog and digital. In analog mode, the vertical signal path is all analog, from the BNC input connector to the electrostatic deflection plates of the CRT. In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms. Other signals such as the trigger level are controlled by the internal computer in both modes.

The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz. Bandwidth in digital mode is considerably lower (20 MHz).

There is a DB-25 connector on the rear panel for connecting a parallel-port printer. It prints correctly to an Epson-compatible printer and allows some customization of what is on the screen. The 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates.

Key Specifications

Bandwidth 60 MHz (non-storage), 10 MHz (storage)
Sampling rate 20 MS/s max.
Deflection 2 mV/Div to 10 V/Div (2 mV/Div bandwidth limited to 10 MHz)
Resolution 8 bits
Memory 4 k samples per channel (Opt. 1M: 128k), can store two waveforms
Input impedance 1 MΩ // 20 pF
Features
  • On-screen readout and cursors
  • X-Y store and non-store operation
  • Store front-panel setup in nonvolatile memory
Options
  • 10: GPIB interface
  • 12: RS-232 Interface
  • 1M: memory expansion to 128k samples per channel
Interfaces Parallel printer port (DB25), RS232C (optional), GPIB (optional)
Power 85 W max.

Links

Pictures