2212: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen | {{Oscilloscope Sidebar| | ||
cursors. It has a switch which | title=Tektronix 2212| | ||
selects between the two modes. In analog mode, the vertical signal path is all analog, from | image=Image needed.jpg| | ||
the BNC input connector to the electrostatic deflection plates of the CRT. | caption=Tektronix 2212 image needed| | ||
Other signals such as the trigger level are controlled by the internal computer in both modes. | years=? — ?| | ||
In digital mode, the input signal is digitized and can be stored or printed or compared with | summary=60 MHz analog/digital oscilloscope| | ||
live waveforms. The 2212 is a dual-trace scope and is rated as having an analog bandwidth | manuals= | ||
of | * [http://w140.com/Tek_2212_User_Manual.pdf Tektronix 2212 User Manual (PDF)] | ||
on the rear panel for connecting a parallel-port printer. It prints correctly to an | * [http://w140.com/Tek_2212_Service_Manual_Sections_1-8.pdf Tektronix 2212 Service Manual without schematics (PDF)] | ||
Epson-compatible printer and allows some customization of what is on the screen. The 2212 | }} | ||
has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates. | The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen cursors. It has a switch which selects between the two modes. In analog mode, the vertical signal path is all analog, from the BNC input connector to the electrostatic deflection plates of the CRT. | ||
Other signals such as the trigger level are controlled by the internal computer in both modes. In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms. The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz. The bandwidth in digital mode is considerably lower. There is a DB-25 connector on the rear panel for connecting a parallel-port printer. It prints correctly to an Epson-compatible printer and allows some customization of what is on the screen. The 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates. | |||
[[list of manuals that are needed|Manual needed]]. (schematics) | [[list of manuals that are needed|Manual needed]]. (schematics) | ||
==Specifications== | |||
==Links== | |||
==Pictures== | |||
[[Category:CRT based solid-state scopes]] | |||
[[Category:Specifications needed]] | |||
[[Category:Manual needed]] | |||
[[Category:Image needed]] | |||
Revision as of 07:25, 9 May 2014
The Tektronix 2212 is a portable mixed analog/digital storage oscilloscope with on-screen cursors. It has a switch which selects between the two modes. In analog mode, the vertical signal path is all analog, from the BNC input connector to the electrostatic deflection plates of the CRT.
Other signals such as the trigger level are controlled by the internal computer in both modes. In digital mode, the input signal is digitized and can be stored or printed or compared with live waveforms. The 2212 is a dual-trace scope and is rated as having an analog bandwidth of 60 MHz. The bandwidth in digital mode is considerably lower. There is a DB-25 connector on the rear panel for connecting a parallel-port printer. It prints correctly to an Epson-compatible printer and allows some customization of what is on the screen. The 2212 has a "roll" mode that emulates a strip chart recorder when in digital mode at slow sample rates.
Manual needed. (schematics)