2247A: Difference between revisions
Jump to navigation
Jump to search
Blunite5454 (talk | contribs) No edit summary |
m (Formatting only) |
||
| Line 21: | Line 21: | ||
Channels 1-2 are fully-functioned, and 3-4 are very limited, in both deflection factor and coupling for digital signals. | Channels 1-2 are fully-functioned, and 3-4 are very limited, in both deflection factor and coupling for digital signals. | ||
The 2247A has advanced features like Auto Setup, Tracking Cursors, Voltmeter, Integrated Counter/Timer, | |||
and Store/Recall of 20 front panels setups. | and Store/Recall of 20 front panels setups. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Bandwidth | 100 MHz }} | {{Spec | Bandwidth | 100 MHz }} | ||
{{Spec | Deflection| CH 1&2: | {{Spec | Deflection| CH 1&2: 2 mV/div to 5 V/div; CH 3&4: 0.1 V/div and 0.5 V/div, all ±2% }} | ||
{{Spec | Vertical Operating Modes | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) }} | {{Spec | Vertical Operating Modes | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) }} | ||
{{Spec | Input Impedance| | {{Spec | Input Impedance| 1 MΩ // 20 pF }} | ||
{{Spec | Sweep Speeds| A Time Base: 0. | {{Spec | Sweep Speeds| A Time Base: 0.5 s/div to 20 ns/div; B Time Base: 5 ms/div to 20 ns/div (×10 magnifier to 2 ns/div) }} | ||
{{Spec | Trigger| DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field }} | {{Spec | Trigger| DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field }} | ||
{{Spec | Trigger Modes| A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) }} | {{Spec | Trigger Modes| A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) }} | ||
{{Spec | Trigger Source A & B| Vert, CH1, 2, 3, 4, Line }} | {{Spec | Trigger Source A & B| Vert, CH1, 2, 3, 4, Line }} | ||
{{Spec | Voltmeter| DC, +Peak, | {{Spec | Voltmeter| DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl }} | ||
{{Spec | Counter/Timer| Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time }} | {{Spec | Counter/Timer| Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time }} | ||
{{Spec | Cursors| Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts }} | {{Spec | Cursors| Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts }} | ||
{{Spec | Interface| Centronics (2252) Printers: Epson FX-Series (9 or 24 | {{Spec | Interface| Centronics (2252) Printers: Epson FX-Series (9- or 24-pin) }} | ||
{{Spec | Probes| Two | {{Spec | Probes| Two [[P6109]] 100 MHz ×10 probes, [[BNC connector]] with a [[readout pin]] }} | ||
{{Spec | Power| | {{Spec | Power| 100 W max, 90 − 250 V<sub>AC</sub>, 48 − 445 Hz }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
| Line 45: | Line 45: | ||
<gallery> | <gallery> | ||
2247A.JPG|Front | |||
US Tektronix 2247A Inside1RAW.jpg | |||
2247A frequency measurement.jpeg | |||
2247A voltage measurement.jpeg | |||
</gallery> | </gallery> | ||
[[Category:2246 series scopes]] | [[Category:2246 series scopes]] | ||
Revision as of 04:12, 15 December 2018
The Tektronix 2247A is a 100 MHz four-channel analog oscilloscope, with a built-in 200 MHz counter/timer. (It is unknown if a 2247 non-A model was ever built.)
The 2247A is part of a nearly identical family consisting of the 2245, 2246, 2247A, and 2252.
Channels 1-2 are fully-functioned, and 3-4 are very limited, in both deflection factor and coupling for digital signals.
The 2247A has advanced features like Auto Setup, Tracking Cursors, Voltmeter, Integrated Counter/Timer, and Store/Recall of 20 front panels setups.
Key Specifications
| Bandwidth | 100 MHz |
|---|---|
| Deflection | CH 1&2: 2 mV/div to 5 V/div; CH 3&4: 0.1 V/div and 0.5 V/div, all ±2% |
| Vertical Operating Modes | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) |
| Input Impedance | 1 MΩ // 20 pF |
| Sweep Speeds | A Time Base: 0.5 s/div to 20 ns/div; B Time Base: 5 ms/div to 20 ns/div (×10 magnifier to 2 ns/div) |
| Trigger | DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field |
| Trigger Modes | A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) |
| Trigger Source A & B | Vert, CH1, 2, 3, 4, Line |
| Voltmeter | DC, +Peak, −Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl |
| Counter/Timer | Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time |
| Cursors | Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts |
| Interface | Centronics (2252) Printers: Epson FX-Series (9- or 24-pin) |
| Probes | Two P6109 100 MHz ×10 probes, BNC connector with a readout pin |
| Power | 100 W max, 90 − 250 VAC, 48 − 445 Hz |
Pictures
-
Front
-
-
-
