If you get the "Sorry, the file cannot be displayed. There seems to be a technical issue ..." error when trying to view an image, please make sure you access the site at http://w140.com/tekwiki/, not www.w140.com/tekwiki/ (with "www"). Sorry for the inconvenience - we are looking for a generic solution.


From TekWiki
Revision as of 23:08, 14 December 2018 by Blunite5454 (talk | contribs)
Jump to: navigation, search
Manuals – Specifications – Links – Pictures

The Tektronix 2247A is a 100 MHz four-channel analog oscilloscope, with a built-in 200 MHz counter/timer. (It is unknown if a 2247 non-A model was ever built.)

The 2247A is part of a nearly identical family consisting of the 2245, 2246, 2247A, and 2252.

Channels 1-2 are fully-functioned, and 3-4 are very limited, in both deflection factor and coupling for digital signals.


Bandwidth 100 MHz
Deflection CH 1&2: 2mV/div to 5V/div; CH 3&4: 0.1V/div and 0.5V/div all at +/- 2%
Vertical Operating Modes CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz)
Input Impedance 1M, 20pF
Sweep Speeds A Time Base: 0.5s/div to 20ns/div; B Time Base: 5ms/div to 20ns/div (X10 Mag to 2ns/div)
Trigger DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field
Trigger Modes A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source)
Trigger Source A & B Vert, CH1, 2, 3, 4, Line
Voltmeter DC, +Peak, -Peak, PK-PK, Gated Volts, Smart Tracking Cursors: Volts, Gnd, Trigger Lvl
Counter/Timer Freq, Period, Width, Totalize, Freq Ratio, Sec, 1/Sec, Phase, Rise/Fall Time, Prop Delay Time
Cursors Time, 1/Time, Delta Time, 1/Delta Time, Delta Phase, Volts
Interface Centronics (2252) Printers: Epson FX-Series (9 or 24 Pin)
Power 100W Max, 90vac - 250vac, 48Hz - 445Hz