2336: Difference between revisions

Revision as of 08:30, 15 November 2021

Tektronix 2336
Ruggedized 100 MHz dual trace scope Tektronix 2336 Produced from 1982 to 1991 Manuals Tektronix 2336 YA Operators Manual (PDF) Tektronix 2300 Series Brochure (PDF) Tektronix 2336 YA Operators Manual (PDF, OCR) Tektronix 2300 Series Brochure (PDF, OCR) (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2336 is a ruggedized portable dual-channel, 100 MHz analog scope. The front cover contains a 3 ½ digit LCD for delta time measurements and B trigger function. A 150 MHz modification was available.

The 2336YA is reportedly the same with only a Curtis elapsed time meter added, and two P6101 probes included.

Key Specifications

{{Spec | Extra inputs | A Trigger Ext (front), B Trigger Ext (front), External Z-Axis (rear)

Bandwidth	100 MHz (≥88 MHz at 2 mV/div)
Deflection	5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div
Input Impedance	1 MΩ ±2% // 20 pF ±10%, 2 channels
Maximum Input Voltage	400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz)
Sweep	A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div
Trigger Source	VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10
Trigger Coupling	AC, LF REJ, HF REJ, or DC
Vertical modes	CH1, ALT, CHOP (~275 kHz), ADD, CH2, AUTO, X-Y, TRIG VIEW, or BW LIMIT (20 MHz)
Horizontal modes	A or B Sweep, A/B Alternate, B Delayed, X-Y
Probes	Two P6108A 100 MHz ×10 probes, BNC connector with a readout pin
Power	40 W max, 90 − 250 V_AC, 48 − 440 Hz

Links

TekScope Vol. 13 No. 2, June 1981 p.10+: Three New Portable Oscilloscopes Designed for Field Service Use

Pictures

Custom ICs used in the 2336

Page	Model	Part nos	Description	Designers	Used in
155-0124-00	M138	155-0124-00	horizontal preamplifier	Bob Nordstrom	455 • SC504 • 2221 • 2230 • 2232 • 2336 • 2337
155-0219-00	155-0219-00	155-0219-00	output amplifier		2335 • 2336 • 2337
155-0220-00	155-0217-00	155-0217-00	amplifier		2335 • 2336 • 2337

@@ Line 15: / Line 15: @@
 * [[Media:2300_Series_Brochure.pdf| Tektronix 2300 Series Brochure ]] (PDF, OCR)
 }}
-The '''Tektronix 2336''' is a ruggedized portable dual-channel, 100 MHz analog scope.  An A Ext connector (external signal to the A Trigger Generator) on the front panel, B Ext connector (external signal to the B Trigger Generator) on the front cover, and External Z-Axis connector at the rear round out its connectivity.  The front cover also has a 3 ½ digit LCD for delta TIME measurements and B Trigger function.  A 150 MHz modification was available.
+The '''Tektronix 2336''' is a ruggedized portable dual-channel, 100 MHz analog scope. The front cover contains a 3 ½ digit LCD for delta time measurements and B trigger function.  A 150 MHz modification was available.
-Vertical controls were by way of calibrated deflection factors on CH 1 or CH 2 inputs through AC, DC, or GND coupling.  The vertical mode selections are CH 1, ALT, CHOP (~275 kHz), ADD, CH 2, AUTO, X-Y, TRIG VIEW, or BW LIMIT (20 MHz).  Horizontal deflection is controlled by either the calibrated A or B Sweep Generators, or Alternate between the two of the A, and B Delayed Sweep.
+The '''2336YA''' is reportedly the same with only a Curtis [[elapsed time meter]] added, and two [[P6101]] probes included.
-Trigger sources may be VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10.  Trigger coupling can be AC, LF REJ, HF REJ, or DC, and can be controlled by amplitude level and slope type.  The Trigger Modes may be set to AUTO, NORM, and SGL SWP.
 {{BeginSpecs}}
-{{Spec | Bandwidth | 100 MHz (≥88 MHz at 2 mV/div) }}
+{{Spec | Bandwidth             | 100 MHz (≥88 MHz at 2 mV/div) }}
-{{Spec | Deflection | 5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div}}
+{{Spec | Deflection            | 5 mV/div to 5 V/div (1−2−5 sequence), ±3%; Variable control can increase sensitivity to at least 2 mV/div}}
-{{Spec | Input Impedance | 1 MΩ ±2% // 20 pF ±10%, 2 channels }}
+{{Spec | Input Impedance       | 1 MΩ ±2% // 20 pF ±10%, 2 channels }}
-{{Spec | Maximum Input Voltage| 400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz) }}
+{{Spec | Maximum Input Voltage | 400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz) }}
-{{Spec | Sweep | A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div }}
+{{Spec | Sweep                 | A Time Base: 0.5 s/div to 50 ns/div, 1−2−5; B Time Base: 50 ms/div to 50 ns/div, 1−2−5; A and B ×10 magnifier extends max sweep to 5 ns/div }}
-{{Spec | Trigger Source| VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10 }}
+{{Spec | Trigger Source        | VERT MODE, CH 1, CH 2, LINE, EXT, and EXT ÷ 10 }}
-{{Spec | Trigger Coupling| AC, LF REJ, HF REJ, or DC }}
+{{Spec | Trigger Coupling      | AC, LF REJ, HF REJ, or DC }}
-{{Spec | Probes| Two [[P6108A]] 100 MHz ×10 probes, BNC connector with a readout pin }}
+{{Spec | Vertical modes        | CH1, ALT, CHOP (~275 kHz), ADD, CH2, AUTO, X-Y, TRIG VIEW, or BW LIMIT (20 MHz) }}
-{{Spec | Power| 40 W max, 90 − 250 V<sub>AC</sub>, 48 − 440 Hz }}
+{{Spec | Horizontal modes      | A or B Sweep, A/B Alternate, B Delayed, X-Y }}
+{{Spec | Extra inputs          | A Trigger Ext (front), B Trigger Ext (front), External Z-Axis (rear)
+{{Spec | Probes                | Two [[P6108A]] 100 MHz ×10 probes, BNC connector with a readout pin }}
+{{Spec | Power                 | 40 W max, 90 − 250 V<sub>AC</sub>, 48 − 440 Hz }}
 {{EndSpecs}}
@@ Line 42: / Line 43: @@
 </gallery>
- [[Category:2300 series scopes]]
+{{Custom ICs|2336}}
+[[Category:2300 series scopes]]