241: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
The '''Tektronix 241''' is a programmer for the Tektronix [[230]].   
{{Oscilloscope Sidebar |
title=Tektronix 241 |
summary=Programmer |
image=Tek241-axo.jpg |
caption=Tektronix 241 front|
introduced=1967 |
discontinued=(?) |
 
manuals=
* [http://bama.edebris.com/download/tek/241/tek%20241.v6.pdf Tektronix 241 Manual (PDF)]
}}
 
The '''Tektronix 241''' is a control unit for the Tektronix [[230]]/[[568]].  It is capable of controlling all programmable aspects of the 230 and compatible sampling plugins ([[3T5]], [[3T6]], [[3S5]], [[3S6]]).
 
The 241 stores up to 15 programs on diode matrix cards. Each card represents one state of the entire test rig.  Cards may be rearranged, and there is room inside the unit for an additional 15 cards (for storage only). Programming is done by arranging diodes to select settings or BCD values, as shown on the silkscreening of the card. Each program is 159 bits, including 14 spares for control of other equipment, such as choppers or multiplexers.
 
Programs may be selected manually, or automatically sequenced. The sequence can be set to stop when one or more of the programmable limit conditions is met via the 230.


Four cables connect J201, J202, J203 and J204 on the 241 to J201, J202, 203 and J204 on the 230 for the purpose of remotely controlling the 230.  Two cables connect J214 and J224 on the 241 to J214 and J224 on the [[568]] for the purpose of controlling programmable vertical and horizontal plug-ins.  
Four cables connect J201, J202, J203 and J204 on the 241 to J201, J202, 203 and J204 on the 230 for the purpose of remotely controlling the 230.  Two cables connect J214 and J224 on the 241 to J214 and J224 on the [[568]] for the purpose of controlling programmable vertical and horizontal plug-ins.  
Line 5: Line 21:
The 241 does not have a power supply; it is powered from the 230 via J204.
The 241 does not have a power supply; it is powered from the 230 via J204.


==Manual==
==Specifications==
* [http://bama.edebris.com/download/tek/241/tek%20241.v6.pdf Tektronix 241 Manual (PDF)]
 


==Pictures==
==Pictures==

Revision as of 19:52, 3 November 2017

{{{manufacturer}}} 
Programmer
Tektronix 241 front

Produced from 1967 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures


The Tektronix 241 is a control unit for the Tektronix 230/568. It is capable of controlling all programmable aspects of the 230 and compatible sampling plugins (3T5, 3T6, 3S5, 3S6).

The 241 stores up to 15 programs on diode matrix cards. Each card represents one state of the entire test rig. Cards may be rearranged, and there is room inside the unit for an additional 15 cards (for storage only). Programming is done by arranging diodes to select settings or BCD values, as shown on the silkscreening of the card. Each program is 159 bits, including 14 spares for control of other equipment, such as choppers or multiplexers.

Programs may be selected manually, or automatically sequenced. The sequence can be set to stop when one or more of the programmable limit conditions is met via the 230.

Four cables connect J201, J202, J203 and J204 on the 241 to J201, J202, 203 and J204 on the 230 for the purpose of remotely controlling the 230. Two cables connect J214 and J224 on the 241 to J214 and J224 on the 568 for the purpose of controlling programmable vertical and horizontal plug-ins.

The 241 does not have a power supply; it is powered from the 230 via J204.

Specifications

Pictures