2465

Manuals – Specifications – Links – Pictures

The Tektronix 2465 is a four-channel 300 MHz portable oscilloscope from the penultimate generation of analog Tektronix scopes. The 2445 is a 150 MHz version.

The horizontal amplifier in the 2465 was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. He and Walt Ainsworth designed the sweeps.

Options

• Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
• Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
• Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
• Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
• Option 10 added a GPIB interface for remote control.

Key Specifications

	— 2445 —
Bandwidth	150 MHz
	— 2465 —
Bandwidth	350 MHz
	— Common —
Sweep Rate	500 ps/div
Channels	Four independent channels
Vertical	2 mV/div vertical sensitivity
Cursors	Delta Volts and Delta Time Cursors
CRT Readout	Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger	Advanced Triggering with "Hands Off" Auto Level Triggering
Trigger Bandwidth	500 MHz min.
Input Impedance	50 Ω/1 MΩ inputs with 50 Ω protection
CRT	154-0850-01
Probes	Two P6131 ×10 probes, 1.3 m

See also

• 2465A
• 2465B
• PSU Repairs

Links

• How to enter test mode
• 2465 series servicing @ hackaday.io

Pictures

2445

• 
• 
• 
• 

  Prototype Knobless 2445 in VintageTEK Museum

2465

• 
• 
• 
• 
• 
• 
• 
•