262: Difference between revisions
No edit summary |
No edit summary |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
The '''Tektronix 262''' is a programmer for the Tektronix [[6R1]] and [[6R1A]] digital plug-ins for the [[567]] [[sampling oscilloscope]] or the [[261]] relay box, | {{Instrument Sidebar | ||
or the [[S-311]], [[S-300]], or [[S-301]] plug-ins. | |manufacturer=Tektronix | ||
|model=262 | |||
|class=Controller | |||
|series= | |||
|summary=Programmer for [[6R1]] and [[6R1A]] | |||
|image=Tek 262 front.jpg | |||
|caption=Tek 262 Front | |||
|introduced=1963 | |||
|discontinued=1972 | |||
|designers= | |||
|manuals= | |||
* [[Media:070-399.pdf|Tektronix 262 Manual]] | |||
* [https://w140.com/tek_262_1968_catalog.pdf Tektronix 262 in 1968 Catalog] | |||
* [[Media:070-457.pdf|Tektronix BCD Limit Converters for the 262]] | |||
}} | |||
The '''Tektronix 262''' is a programmer for the Tektronix [[6R1]] and [[6R1A]] digital plug-ins for the [[567]] [[sampling oscilloscope]] or the [[261]] relay box, or the [[S-311]], [[S-300]], or [[S-301]] plug-ins. | |||
It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. Each of these cards specifies one measurement. | It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. | ||
These program cards are configurable by the user. | Each of these cards specifies one measurement. These program cards are configurable by the user. | ||
The 262 has slots for up to eight program cards. They are activated one at a time, either | The 262 has slots for up to eight program cards. | ||
manually by pressing program selection switches on the front panel of the 262, | They are activated one at a time, either manually by pressing program selection switches on the front panel of the 262, or by having the 262 execute the measurements automatically in sequence, or the measurements can be activated remotely when the 262 is slaved to another 262. | ||
or by having the 262 execute the measurements automatically in sequence, | |||
or the measurements can be activated remotely when the 262 is slaved to another 262. | |||
The 262 was discontinued after 1971. | The 262 was discontinued after 1971. | ||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek 262 front.jpg|Front | Tek 262 front.jpg|Front | ||
| Line 54: | Line 64: | ||
Tek 262 rear2.jpg|Rear | Tek 262 rear2.jpg|Rear | ||
Tek 262 program switch internal.jpg|Program Switch Internal | Tek 262 program switch internal.jpg|Program Switch Internal | ||
Tek 262.jpg|Front view | Tek 262.jpg|Front view | ||
| Line 67: | Line 74: | ||
[[Category:Controllers]] | [[Category:Controllers]] | ||
Latest revision as of 20:33, 9 March 2024
The Tektronix 262 is a programmer for the Tektronix 6R1 and 6R1A digital plug-ins for the 567 sampling oscilloscope or the 261 relay box, or the S-311, S-300, or S-301 plug-ins.
It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. Each of these cards specifies one measurement. These program cards are configurable by the user.
The 262 has slots for up to eight program cards. They are activated one at a time, either manually by pressing program selection switches on the front panel of the 262, or by having the 262 execute the measurements automatically in sequence, or the measurements can be activated remotely when the 262 is slaved to another 262.
The 262 was discontinued after 1971.
Pictures
-
Front
-
Front Left
-
Fromt Left
-
Front Right
-
Top Internal
-
Top Internal
-
Program Card
-
Program Card
-
Program Card Relay
-
Program Card v2
-
Program Card v2
-
Logic Card
-
Logic Card
-
Synchronizer Card
-
Synchronizer Card
-
Regulator Card
-
Regulator Card
-
Counter Card
-
Counter Card
-
Comparator Card
-
Comparator Card
-
Right Front Cards
-
Power Supply
-
Left Rear Connector Wiring
-
Right Rear Connector Wiring
-
Rear Left
-
Rear Right
-
Rear
-
Program Switch Internal
-
Front view
-
Rear view
-
Inside view
-
-
programming card
-
programming card
