262: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 35: Line 35:
Tek 262 synchronizer card front.jpg|Synchronizer Card
Tek 262 synchronizer card front.jpg|Synchronizer Card
Tek 262 synchronizer card back.jpg|Synchronizer Card
Tek 262 synchronizer card back.jpg|Synchronizer Card
Tek 262 right front cards.jpg|Right Front Cards


Tek 262 regulator board front.jpg|Regulator Card
Tek 262 regulator board front.jpg|Regulator Card
Line 44: Line 42:
Tek 262 counter card back.jpg|Counter Card
Tek 262 counter card back.jpg|Counter Card


Tek 262 comparator card front.jpg|Comparator Card
Tek 262 comparator card back.jpg|Comparator Card
Tek 262 right front cards.jpg|Right Front Cards
Tek 262 ps top internal.jpg|Power Supply
Tek 262 ps top internal.jpg|Power Supply
Tek 262 rear left wiring internal.jpg|Left Rear Connector Wiring
Tek 262 rear left wiring internal.jpg|Left Rear Connector Wiring
Line 53: Line 55:




Tek 262 comparator card front.jpg
 
Tek 262 comparator card back.jpg


Tek 262.jpg|Front view
Tek 262.jpg|Front view

Revision as of 20:05, 4 June 2018

The Tektronix 262 is a programmer for the Tektronix 6R1 and 6R1A digital plug-ins for the 567 sampling oscilloscope or the 261 relay box, or the S-311, S-300, or S-301 plug-ins.

It connects via a cable to J34 on the 6R1 or 6R1A. Small printed circuit boards called program cards fit into slots in a bus inside the 262. Each of these cards specifies one measurement. These program cards are configurable by the user.

The 262 has slots for up to eight program cards. They are activated one at a time, either manually by pressing program selection switches on the front panel of the 262, or by having the 262 execute the measurements automatically in sequence, or the measurements can be activated remotely when the 262 is slaved to another 262.

The 262 was discontinued after 1971.