292: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 15: Line 15:
* [http://w140.com/tek_292.pdf Tektronix 292 Manual (PDF)]
* [http://w140.com/tek_292.pdf Tektronix 292 Manual (PDF)]
* [http://bama.edebris.com/download/tek/292/Tek%20292.pdf Tektronix 292 Manual (BAMA, PDF)]
* [http://bama.edebris.com/download/tek/292/Tek%20292.pdf Tektronix 292 Manual (BAMA, PDF)]
* [[Media:Tek 292 fcp april 1967.pdf]]
* [[Media:Tek 292 fcp april 1967.pdf|Tektronix 292 Factory Calibration Procedure, April 1967]]


==Pictures==
==Pictures==

Revision as of 10:59, 8 June 2019

The Tektronix Type 292 is a Semiconductor Tester Power Supply, to be used with a test fixture.

The 016-0057-00 is the standard fixture for use with the 292.

A 016-0058-00 board, intended for grounded base circuit, is listed but not pictured in the 292 manual, and is never mentioned in any TEK catalog.

A 016-0059-00 PCB for testing diodes is shown in the 292 manual. This diode test jig adapter was using a 013-0080-00 diode test jig. This test jig replaced the poorly working (bad contact) original TF-1 (017-0721) for the 291, together with a new adapter (017-0075-00).

Manuals

Pictures