308: Difference between revisions
No edit summary |
(manual) |
||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | | |||
title=Sony/Tektronix 308 | | |||
summary=20 MHz 8-ch Logic Analyzer | | |||
image=308-timing.jpg | | |||
caption=Sony/Tektronix 308 | | |||
introduced=1980| | |||
discontinued=1986| | |||
manuals= | |||
* [[Media:070-2663-00.pdf | Tek 308 Operator's Manual (PDF, 3MB)]] | |||
* [[Media:070-2662-00.pdf | Tek 308 Service manual (PDF, OCR, 13MB)]] | |||
}} | |||
The '''Sony/Tektronix 308''' is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes. | The '''Sony/Tektronix 308''' is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes. | ||
The 308 uses two probes, the standard [[P6451]] 8-channel + clock data acquisition probe, and the optional 16-channel [[P6406]] word recognizer probe. Both use [[012-0747-00]] cable harnesses to attach to the data source. | The 308 uses two probes, the standard [[P6451]] 8-channel + clock data acquisition probe, and the optional 16-channel [[P6406]] word recognizer probe. Both use [[012-0747-00]] cable harnesses to attach to the data source. | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
Revision as of 11:02, 21 June 2017
The Sony/Tektronix 308 is a portable 8-channel, 20 MHz "data analyzer" (logic analyzer) with parallel timing, parallel state, serial (up to 9600 bps) and signature analysis modes.
The 308 uses two probes, the standard P6451 8-channel + clock data acquisition probe, and the optional 16-channel P6406 word recognizer probe. Both use 012-0747-00 cable harnesses to attach to the data source.
Key Specifications
| — Inputs — | |
| Data | Eight data channels + 1 clock channel (P6451 probe), impedance 1 MΩ // 5 pF, max. ±40 V nondestructive, logic threshold fixed 1.4 V (TTL) or variable from -12 V to +12 V |
| Word recognizer | Sixteen TTL inputs (+40/-400 μA max.), max. +15/-1 V |
| Serial | BNC connector, 1 MΩ // 40 pF, max. ±250 V on BNC; used with P6107 probe, 10 MΩ // 13 pF, max. ±500 V |
| Qualifier | BNC connector, 10 kΩ, max. +10/-5 V |
| — Acquisition — | |
| Clock | 50 ns to 200 ms per sample (1-2-5 sequence) or external down to 50 ns |
| Timing | Data setup time min. 25 ns, hold time min. 0 ns |
| Memory | 2 × 252 eight-bit words (acquisition + reference) |
| Trigger mode | PRE (trigger at memory location 240) or POST (location 13) |
| Trigger delay | 0-65535 clock periods |
| Serial data | 5, 6, 7 or 8 bits per character, asynchronous (50, 75, 110, 134.5, 150, 200, 300, 600, 1200, 1900, 2400, 4800 or 9600 bits/s or external up to 9600 bits/s) or synchronous up to 9600 bits/s |
| — Display — | |
| CRT | 6.8 cm × 5.4 cm, P4 phosphor (white) |
| — General — | |
| Power | 90-132 V or 180-250 V, 48-440 Hz |
| Weight | 3.7 kg (8.16 lb) |
Links
- Tekscope Vol. 12 No. 2, Apr 1980, Ed Averill, John Huber: Portable Data Analyzer Speeds Test and Service of Microprocessor-Based Systems
- Tek 308 @ radiomuseum.org
- Tek 308 @ barrytech.com
Internals
The 308 is built around an Intel 8085A microprocessor. The display is a magnetically deflected raster-scan CRT. The only Tek-specific IC in the 308 is a 155-0067-02 SMPS controller.
Pictures
-
308 display, timing mode (binary counter example)
-
308 display, state mode (binary counter example)
-
-
-
-
-
-
-
P6451 probe
-
P6451 probe
-
P6451 probe internal, PCB front
-
P6451 probe internal, PCB back
-
