317: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 12: | Line 12: | ||
* [[Media:tek_317_fcp.pdf|Tektronix 317 Factory Calibration Procedure (PDF, OCR)]] | * [[Media:tek_317_fcp.pdf|Tektronix 317 Factory Calibration Procedure (PDF, OCR)]] | ||
* [http://w140.com/tek_317_irb.pdf Tektronix 317 Instrument Reference Book (PDF, OCR)] | * [http://w140.com/tek_317_irb.pdf Tektronix 317 Instrument Reference Book (PDF, OCR)] | ||
* [[Media:Tek 317 fcp dec 1968.pdf]] | |||
}} | }} | ||
The '''Tektronix 317''', [[introduced in 1959]], is a monolithic 10 MHz scope similar to the [[316]], | The '''Tektronix 317''', [[introduced in 1959]], is a monolithic 10 MHz scope similar to the [[316]], |
Revision as of 06:33, 5 June 2019
The Tektronix 317, introduced in 1959, is a monolithic 10 MHz scope similar to the 316, but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT. It was intended for use where a bright display is needed. There is also a rackmount version, the RM17.
The 317 initially used UHF connectors for the signal input and calibrator output; later units use BNC connectors.
Type 317 Mod 101 operates on 50 to 400 Hz power and uses a DC fan motor.
Key Specifications
Deflection | 0.1 V/div to 50 V/div, 1−2−5, and variable |
---|---|
Bandwidth | DC to 10 MHz (50/20/10 mV/div AC only) |
Rise time | 35 ns |
Input | one channel, 1 MΩ // 38 pF input impedance |
Sweep | 200 ns/div to 2 s/div, 1−2−5, and variable |
CRT | T317 CRT (154-0346-00), 9 kV acceleration |
Links
Pictures
-
-
-
-
-
-
-
RM17
-
317 with camera mount
-
early 317 with leather handle
-
early 317 with leather handle
-
-
-
-
-
-
-
-
RM17
-
RM17