326: Difference between revisions
Jump to navigation
Jump to search
(year) |
No edit summary |
||
Line 24: | Line 24: | ||
==Specifications== | ==Specifications== | ||
{{BeginSpecs}} | |||
{{Spec | Bandwidth | 10 MHz (approx. 5 MHz in ×10 mode) }} | |||
{{Spec | Rise time | 36 ns (72 ns in ×10 mode) }} | |||
{{Spec | Sweep | 1 μs/Div to 1 s/Div, 1—2—5, ×10 magnifier (i.e. to 100 ns/Div) }} | |||
{{Spec | Deflection | 10 mV/Div to 10 V/Div (1 mV/Div to 1 V/Div in ×10 mode) }} | |||
{{Spec | Input impedance | 1 MΩ // 47 pF }} | |||
{{Spec | Calibrator | 0.5 V<sub>p-p</sub>, 800 Hz +- 250 Hz, source impedance 10 kΩ }} | |||
{{Spec | CRT | 10 × 8 Div. @ 6.25 mm (0.25") }} | |||
{{Spec | AC Power | 90—136 V or 180—272 V, 48—440 Hz, 35 VA at 136 V (maximum intensity, maximum charge rate)}} | |||
{{Spec | DC Power | 9—32 V, 12 max. }} | |||
{{Spec | Battery | Nine size "C" NiCd cells, runtime 1.5 h (full intensity) / 4 h (low intensity), charge time 16 h }} | |||
{{Spec | Dimensions | 10.2 cm × 22.2 cm × 38.1 cm (31 cm without charger) }} | |||
{{Spec | Weight | 5.9 kg (4.5 kg without charger) }} | |||
{{Spec | Features | | |||
* Ext Trig / X input (supports X-Y displays up to 200 kHz) | |||
* External blanking input (by deflection, not Z modulation, to 100 kHz) | |||
* Built in battery | |||
}} | |||
{{EndSpecs}} | |||
* [http://w140.com/tek_326_desc.pdf Tektronix 326 Specifications (PDF)] | * [http://w140.com/tek_326_desc.pdf Tektronix 326 Specifications (PDF)] | ||
[[Category:Specifications needed]] | [[Category:Specifications needed]] | ||
==Pictures== | ==Pictures== |
Revision as of 16:42, 23 October 2015
The Sony/Tektronix 326 is an ultra-portable 10 MHz dual trace oscilloscope with 300 ns delay line and a removable battery pack.
Electrically, it is relatively classic, but it is not constructed like classic Tek scopes.
The 326 has no Tek-made ICs. It uses many Sony transistors.
The 326's power supply/charger is conceptually similar to that of the 323, but the 0.3 Ω resistor is in the battery pack.
The power supply and oscilloscope are separable. The scope can be be operated without power supply.
Specifications
Key Specifications
Bandwidth | 10 MHz (approx. 5 MHz in ×10 mode) |
---|---|
Rise time | 36 ns (72 ns in ×10 mode) |
Sweep | 1 μs/Div to 1 s/Div, 1—2—5, ×10 magnifier (i.e. to 100 ns/Div) |
Deflection | 10 mV/Div to 10 V/Div (1 mV/Div to 1 V/Div in ×10 mode) |
Input impedance | 1 MΩ // 47 pF |
Calibrator | 0.5 Vp-p, 800 Hz +- 250 Hz, source impedance 10 kΩ |
CRT | 10 × 8 Div. @ 6.25 mm (0.25") |
AC Power | 90—136 V or 180—272 V, 48—440 Hz, 35 VA at 136 V (maximum intensity, maximum charge rate) |
DC Power | 9—32 V, 12 max. |
Battery | Nine size "C" NiCd cells, runtime 1.5 h (full intensity) / 4 h (low intensity), charge time 16 h |
Dimensions | 10.2 cm × 22.2 cm × 38.1 cm (31 cm without charger) |
Weight | 5.9 kg (4.5 kg without charger) |
Features |
|
Pictures
-
front
-
rear
-
open, lower
-
open, upper
-
new battery pack (homemade from 9 pieces NiCd sub-C cell)