3A2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
Channel switching in ALTERNATE mode is done using diodes. The output stage that | Channel switching in ALTERNATE mode is done using diodes. The output stage that | ||
drives the vertical deflection plates of the scope uses a pair of 6BA8 pentodes. | drives the vertical deflection plates of the scope uses a pair of 6BA8 pentodes. | ||
* [http://bama.edebris.com/download/tek/3a2/3a2.djvu Tektronix 3A2 Manual (DjVu)] | |||
<gallery> | <gallery> | ||
Revision as of 16:03, 29 April 2011
The Tektronix Type 3A2 is a dual-trace amplifier plug-in introduced in 1963 for 560-series oscilloscopes. It was designed for compatibility with the digital unit in the 567. Bandwidth is 500 KHz. The input impedance is 47pF. Deflection factor ranges from 10mV/div to 25V/div. The input signal passes through compensated attenuators and then into a 12AT7 cathode-follower stage. Channel switching in ALTERNATE mode is done using diodes. The output stage that drives the vertical deflection plates of the scope uses a pair of 6BA8 pentodes.
