3S2: Difference between revisions

Revision as of 17:59, 3 February 2018

The Tektronix Type 3S2 is a dual-trace sampling plug-in for 560-series scopes. It takes two 7000 and 3S series sampling heads such as the S-1, S-2, S-3, S-4, S-5, or S-6.

Bandwidth and sensitivity are determined by the sampling heads, not the 3S2.

The 3S2 uses a BSM connector for the trigger output on the front panel.

please add

@@ Line 1: / Line 1: @@
-The Tektronix Type 3S2 is a dual-trace sampling plug-in for 560-series oscilloscopes.
+{{Plugin Sidebar 2|
-It takes two sampling heads such as the S1, S2, S3, S4, S5, and S6.  The bandwidth and
+title=Tektronix 3S2 |
-sensitivity is primarily determined by the sampling heads, not the 3S2.
+summary=Dual trace sampling plugin |
+image=3s2_front.JPG |
+caption=Tek 3S2 front view |
+series=[[560-series scopes]]  |
+introduced=1967 |
+discontinued=1975 |
+manuals=
+* [http://w140.com/tek_3s2.pdf 3S2 Manual]
+}}
+The '''Tektronix Type 3S2''' is a dual-trace [[sampling oscilloscope|sampling plug-in]] for [[560-series scopes]].
+It takes two [[7000 and 3S series sampling heads]] such as the [[S-1]], [[S-2]], [[S-3]], [[S-4]], [[S-5]], or [[S-6]].
+Bandwidth and sensitivity are determined by the sampling heads, not the 3S2.
+The 3S2 uses a [[BSM connector]] for the trigger output on the front panel.
+==Specifications==
+[[Category:Specifications needed]] ''please add''
+==Pictures==
+<gallery>
+s2_front.JPG|front view
+s2_left.JPG|left view
+s2_right.JPG|right view
+s2_top.JPG|top view
+s2_bottom.JPG|bottom view
+s2_rear.JPG|rear view
+</gallery>
+[[Category:Sampling plugins]]
+[[Category:560 series plugins]]