Difference between revisions of "3S2"

From TekWiki
Jump to: navigation, search
Line 3: Line 3:
 
[[S3]], [[S4]], [[S5]], and [[S6]].  The bandwidth and
 
[[S3]], [[S4]], [[S5]], and [[S6]].  The bandwidth and
 
sensitivity is primarily determined by the sampling heads, not the 3S2.
 
sensitivity is primarily determined by the sampling heads, not the 3S2.
 +
The 3S2 uses a [[BSM connector]] for the trigger output on the front panel.
  
 
* [http://w140.com/tek_3s2.pdf 3S2 Manual]
 
* [http://w140.com/tek_3s2.pdf 3S2 Manual]

Revision as of 18:59, 17 January 2011

The Tektronix Type 3S2 is a dual-trace sampling plug-in for 560-series oscilloscopes. It takes two sampling heads such as the S1, S2, S3, S4, S5, and S6. The bandwidth and sensitivity is primarily determined by the sampling heads, not the 3S2. The 3S2 uses a BSM connector for the trigger output on the front panel.