If you get the "Sorry, the file cannot be displayed. There seems to be a technical issue ..." error when trying to view an image, please make sure you access the site at http://w140.com/tekwiki/, not www.w140.com/tekwiki/ (with "www"). Sorry for the inconvenience - we are looking for a generic solution.

Difference between revisions of "3S2"

From TekWiki
Jump to: navigation, search
Line 1: Line 1:
The Tektronix Type 3S2 is a dual-trace sampling plug-in for 560-series oscilloscopes.
+
The Tektronix Type 3S2 is a dual-trace [[sampling oscilloscope|sampling]] plug-in for [[560-series scopes]].
 
It takes two sampling heads such as the [[S1]], [[S2]],  
 
It takes two sampling heads such as the [[S1]], [[S2]],  
 
[[S3]], [[S4]], [[S5]], and [[S6]].  The bandwidth and
 
[[S3]], [[S4]], [[S5]], and [[S6]].  The bandwidth and

Revision as of 16:12, 29 April 2011

The Tektronix Type 3S2 is a dual-trace sampling plug-in for 560-series scopes. It takes two sampling heads such as the S1, S2, S3, S4, S5, and S6. The bandwidth and sensitivity is primarily determined by the sampling heads, not the 3S2. The 3S2 uses a BSM connector for the trigger output on the front panel.