3S7: Difference between revisions
Jump to navigation
Jump to search
(photos) |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix Type 3S7 is a sampling plug-in for 560-series scopes such as the [[561]]. Used with the | The Tektronix Type 3S7 is a sampling | ||
[[3T7]], a TDR system is formed. | plug-in for 560-series scopes such as the | ||
[[561]] and [[564]]. Used with the [[3T7]], | |||
a TDR system is formed. The 3S7/3T7 are | |||
seen on the front cover of the document | |||
[http://slack.com/TE/TekConcepts/TekTDRMeas.pdf Tektronix TDR Measurement Concepts]. | |||
Like the | |||
[[1S2]], the connectors on the 3S7/3T7 are | |||
50-Ohm GR-874. A short coaxial cable carries | |||
the pulse from the front panel output of the | |||
3T7 to the front panel input of the 3S7, where | |||
it passes through the sampling gate and out to | |||
the cable or network under test. | |||
<gallery> | <gallery> | ||
Revision as of 11:37, 1 June 2010
The Tektronix Type 3S7 is a sampling plug-in for 560-series scopes such as the 561 and 564. Used with the 3T7, a TDR system is formed. The 3S7/3T7 are seen on the front cover of the document Tektronix TDR Measurement Concepts. Like the 1S2, the connectors on the 3S7/3T7 are 50-Ohm GR-874. A short coaxial cable carries the pulse from the front panel output of the 3T7 to the front panel input of the 3S7, where it passes through the sampling gate and out to the cable or network under test.
-
Front
-
Left
-
Right
-
Top
-
Bottom
