3S7: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(4 intermediate revisions by the same user not shown)
Line 19: Line 19:
3T7 to the front panel input of the 3S7, where it passes through the  
3T7 to the front panel input of the 3S7, where it passes through the  
sampling gate and out to the cable or network under test.
sampling gate and out to the cable or network under test.
The interface between the GR-874 connector and the printed circuit board is described in US Patent 3,426,311.


==Specifications==
==Specifications==
Line 26: Line 28:


<gallery>
<gallery>
File:3s7_front.JPG|Front
3s7_front.JPG|Front
File:3s7_left.JPG|Left
3s7_left.JPG|Left
File:3s7_right.JPG|Right
3s7_right.JPG|Right
File:3s7_top.JPG|Top
3s7_top.JPG|Top
File:3s7_bottom.JPG|Bottom
3s7_bottom.JPG|Bottom
Tek_3s7_bottom.jpg|bottom
Tek_3s7_bottom_full.jpg|bottom
Tek 3s7 panel wiring.jpg|panel wiring
</gallery>
</gallery>





Revision as of 05:19, 14 May 2018

Template:Plugin Sidebar 2 The Tektronix Type 3S7 is a sampling plug-in for 560-series scopes such as the 561 and 564. The 3S7 was introduced in 1971.

Used with the 3T7, a TDR system is formed. The 3S7/3T7 are seen on the front cover of the document Tektronix TDR Measurement Concepts. Like the 1S2, the connectors on the 3S7/3T7 are 50 Ω GR-874 connectors. A short coaxial cable carries the pulse from the front panel output of the 3T7 to the front panel input of the 3S7, where it passes through the sampling gate and out to the cable or network under test.

The interface between the GR-874 connector and the printed circuit board is described in US Patent 3,426,311.

Specifications

please add

Pictures