442: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 9: Line 9:
* [http://w140.com/tek_442_operators.pdf Tektronix 442 Operators Manual (PDF)]
* [http://w140.com/tek_442_operators.pdf Tektronix 442 Operators Manual (PDF)]
* [http://w140.com/tek_442_service.pdf Tektronix 442 Service Manual (PDF)]
* [http://w140.com/tek_442_service.pdf Tektronix 442 Service Manual (PDF)]
* [[Media:070-2373-00.pdf|Tektronix 442 Operators Manual (PDF, OCR)]]
}}
}}



Revision as of 11:27, 9 August 2018

{{{manufacturer}}} 
35 MHz dual-trace scope
Tek 442

Produced from (?) to (?)

Manuals
Manuals – Specifications – Links – Pictures


The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.

Specifications

please add

The anode voltage on the CRT is 10 kV and the standard phosphor was P31.

A Tektronix 442 consumes 36 watts and weighs about 20 pounds.

Internals

Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.

Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.

The power supply is linear and regulated using op amps as error amplifiers.

The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.

Links

Pictures