442

From TekWiki
Revision as of 14:16, 24 December 2014 by Kurt (talk | contribs)
Jump to navigation Jump to search
{{{manufacturer}}} 
35 MHz dual-trace scope
Tek 442

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures


The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.

Specifications

please add

The anode voltage on the CRT is 10kV and the standard phosphor was P31.

A Tektronix 442 consumes 36 watts and weighs about 20 pounds.

Internals

Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.

Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.

The power supply is linear and regulated using op amps as error amplifiers.

The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.

Links

Pictures