507: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
It does not take plug-ins. The power supply is external, | It does not take plug-ins. The power supply is external, | ||
like the [[517]], [[551]], and [[555]]. | like the [[517]], [[551]], and [[555]]. | ||
The vertical signal path of the 507 does not contain amplifiers. It has a | |||
5 nanosecond risetime. The input impedance of the 507 is 72 ohms. The maximum | |||
sensitivity is deliberately low: 50V/cm. The input attenuator is very unusual for Tek scopes. | |||
It is a switch with ten positions in "% of signal", where each step is 10%. The deflection signal | |||
is permanently AC-coupled and, unusually, the DC blocking capacitor is after the input attenuator. | |||
* [http://w140.com/tek_507.pdf Tektronix 507 Manual (PDF)] | * [http://w140.com/tek_507.pdf Tektronix 507 Manual (PDF)] | ||
Revision as of 19:07, 17 December 2010
The Tektronix Type 507 was designed for the power industry for surge testing. It was introduced in 1959. The scope was intended to operate in an environment of strong electromagnetic fields. It does not take plug-ins. The power supply is external, like the 517, 551, and 555.
The vertical signal path of the 507 does not contain amplifiers. It has a 5 nanosecond risetime. The input impedance of the 507 is 72 ohms. The maximum sensitivity is deliberately low: 50V/cm. The input attenuator is very unusual for Tek scopes. It is a switch with ten positions in "% of signal", where each step is 10%. The deflection signal is permanently AC-coupled and, unusually, the DC blocking capacitor is after the input attenuator.