533: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 29: | Line 29: | ||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Bandwidth | DC to | {{Spec | Bandwidth | DC to 15 MHz (≤ 3 dB) with [[K|Type K plug-in]] }} | ||
{{Spec | Rise time | 0.024 μs }} | {{Spec | Rise time | 0.024 μs }} | ||
{{Spec | Line Voltage | 108/115/122/216/230/244 V<sub>AC</sub> ±10%,selected via soldering wire on transformer, 50 Hz to 60 Hz | {{Spec | Line Voltage | 108/115/122/216/230/244 V<sub>AC</sub> ±10%, selected via soldering wire on transformer, 50 Hz to 60 Hz }} | ||
{{Spec | Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }} | {{Spec | Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level }} | ||
{{Spec | Power Consumption | | {{Spec | Power Consumption | 500 W with [[CA| CA plug-in]] }} | ||
{{Spec | Cooling | AC Fan }} | {{Spec | Cooling | AC Fan }} | ||
{{Spec | Trigger Modes (533)| AC/DC/AC Slow, and HF Sync}} | {{Spec | Trigger Modes (533)| AC/DC/AC Slow, and HF Sync}} | ||
| Line 40: | Line 40: | ||
{{Spec | Screen Area | 6 cm × 10 cm}} | {{Spec | Screen Area | 6 cm × 10 cm}} | ||
{{Spec | Construction | Aluminum alloy chassis. Anodized front panel}} | {{Spec | Construction | Aluminum alloy chassis. Anodized front panel}} | ||
{{Spec | Weight| 61 | {{Spec | Weight| 61.5 lbs / 27.8 kg }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 00:24, 18 March 2019
The Tektronix Type 533 is a 15 MHz oscilloscope introduced in 1958
that uses letter-series and 1-series plug-ins.
It is similar to a 535, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from ×2 to ×100.
There is also a rack-mount version, the RM33. Later 533A have BNC connectors. The standard CRT for the 533 and 533A is the T5330-2. Difference between 533 and 533A is only trigger mode.
Key Specifications
| Bandwidth | DC to 15 MHz (≤ 3 dB) with Type K plug-in |
|---|---|
| Rise time | 0.024 μs |
| Line Voltage | 108/115/122/216/230/244 VAC ±10%, selected via soldering wire on transformer, 50 Hz to 60 Hz |
| Thermal Protection | Automatic resetting thermal cutout, in case internal temperature exceeds safe operating level |
| Power Consumption | 500 W with CA plug-in |
| Cooling | AC Fan |
| Trigger Modes (533) | AC/DC/AC Slow, and HF Sync |
| Trigger Modes (533A) | AC/DC/AC LF Reject, and HF Sync |
| Anode Potential | 10 kV |
| Screen Area | 6 cm × 10 cm |
| Construction | Aluminum alloy chassis. Anodized front panel |
| Weight | 61.5 lbs / 27.8 kg |
Internals
The vertical amplifier consists of a 12BY7 differential amplifier followed by a 6DJ8 cathode-follower, followed by a 6197 differential (common-cathode) output stage that drives the 200 ns L-C delay line, which drives the vertical deflection plates of the CRT.
Trigger pickoff is taken after the cathode follower stage in the vertical amplifier. There is a 6DJ8 differential trigger pickoff amplifier followed by half of a 6DJ8 a cathode follower, buffering the trigger signal.
The trigger circuit is a 6DJ8 trigger amplifier followed by a 6DJ8 Schmitt trigger. Triggering can be from the internal pickoff or from an external signal or "line" trigger, from a 6.3 V tap on the power transformer.
The 533 contains a 53 °C (128 °F) thermal cutoff. The high voltages for the CRT, +8,650 V and −1,350 V, are generated by a 60 kHz Hartley power oscillator and five 5642 high-voltage rectifier diode tubes.
Pictures
-
front from different 533A
-
533A front
-
533A rear
-
533A
-
533A delay line
-
533A delay line
