544: Difference between revisions

From TekWiki
Jump to navigation Jump to search
m (correct discontinuation year based on 1972-73 catalogs)
No edit summary
(8 intermediate revisions by 3 users not shown)
Line 9: Line 9:
* [http://bama.edebris.com/download/tek/544/544.djvu Tektronix 544 Manual (DjVu)]
* [http://bama.edebris.com/download/tek/544/544.djvu Tektronix 544 Manual (DjVu)]
* [http://w140.com/tek_544.pdf Tektronix 544 Manual (PDF)]
* [http://w140.com/tek_544.pdf Tektronix 544 Manual (PDF)]
<!-- * [[Media:Tek 547 544 546 technical instruction and training.pdf|Tektronix 547, 546, and 544 Technical Instruction and Training (PDF, needs OCR)]] -->
* [http://w140.com/Hi-speed_recorder.pdf General Electric Report from 1968 Discussing Tek 544 Mod 108G (PDF)]
* [http://w140.com/Hi-speed_recorder.pdf General Electric Report from 1968 Discussing Tek 544 Mod 108G (PDF)]
* [[Media:070-418.pdf|Tektronix 544 Manual (PDF, OCR, bad-OCR)]]
* [[Media:Tek_547_544_546_tech_instr_and_training.pdf|Tektronix 547, 546, and 544 Technical Instruction and Training (PDF, OCR)]]
* [[Media:GE_report_1968.pdf|General Electric Report from 1968 Discussing Tek 544 Mod 108G (PDF, OCR, bad-OCR)]]
* [[Media:Tek 544 fcp dec 1968.pdf|Tektronix 544 Factory Calibration Procedure, December 1968 (PDF, needs OCR)]]
}}
}}


Line 21: Line 27:
The 544 (at least the early ones) uses the same [[tunnel diodes|tunnel diode]] triggering circuit  
The 544 (at least the early ones) uses the same [[tunnel diodes|tunnel diode]] triggering circuit  
as is used in early [[547]] (tunnel diode in the collector load of a PNP differential amplifier).  
as is used in early [[547]] (tunnel diode in the collector load of a PNP differential amplifier).  
There is also a rackmount version, the RM544.


A factory modification, MOD 108G, was available that increased the accelerating voltage to 24 kV.
A factory modification, MOD 108G, was available that increased the accelerating voltage to 24 kV.

Revision as of 08:33, 2 June 2019

Manuals – Specifications – Links – Pictures


The Tektronix Type 544 is a 50 MHz scope introduced in 1964.

It has one timebase with several horizontal magnifier modes (×2, ×5, ×10, ×20, ×50, and ×100). To make horizontal magnification usable, the 544 has a vernier horizontal position control in addition to the regular horizontal position control. The fastest calibrated sweep is 10 ns/div. Some magnification modes provide sweeps faster than 10 ns/div, but in those modes the horizontal scale is not calibrated, and a lamp on the front panel lights up to remind the operator of that.

The 544 (at least the early ones) uses the same tunnel diode triggering circuit as is used in early 547 (tunnel diode in the collector load of a PNP differential amplifier).

There is also a rackmount version, the RM544.

A factory modification, MOD 108G, was available that increased the accelerating voltage to 24 kV. The 1968 catalog lists an RM544 Mod 720 which has a direct-access plug-in and has 1 ns risetime (equiv. 350 MHz).

The vertical amplifier and low voltage power supply of the 544 are the same as those of the 546 and 547. The 544 uses the 154-0478-00 CRT which is also used by the 543B, 545B, 546, and 547.

The project lead for the development of the Tektronix 544, 546, and 547 was Bob Rullman.

Key Specifications

  • please add

Pictures