5642: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
(12 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The 5642 is a directly-heated high-voltage rectifier tube.  It is used in the CRT cathode and
[[File:Apollo 5642 tube.jpg|thumb|300px|right|Apollo 5642 tube]]
post-deflection acceleration supplies in many Tektronix scopes. In typical
The '''5642''' is a directly-heated high-voltage rectifier tube.  It has three flexible lead connections and is intended to be soldered into the circuit.
CRT circuits, the filament/cathode leads of each 5642 has its own secondary winding
The European type DY70 is very similar (with lower heater current).
on the HV transformer.


[http://w140.com/5642.pdf 5642 datasheet]
It is used in the CRT cathode and post-deflection acceleration supplies in many Tektronix scopes. 
In typical CRT circuits, the filament/cathode leads of each 5642 have their own secondary winding
on the HV transformer.
 
Tek part number: 154-0051-00, 154-0079-00
 
{{BeginSpecs}}
{{Spec|Heater|1.25 V, 200 mA }}
{{Spec|Peak inverse volrage | 10 kV}}
{{Spec|Peak plate current | 250 μA }}
{{EndSpecs}}
 
==Links==
* [http://w140.com/5642.pdf RCA 5642 datasheet (PDF)]
* [[tube:5642|5642 @ radiomuseum.org]]
 
==Pictures==
<gallery>
Tek 516 hvps1.jpg|Three 5642s in a [[516]] HV supply
Tek 547 HVSection-NoCover.jpg | 5642s in a [[547]] HV Supply
Apollo 5642 tube.jpg
Apollo 5642 1.jpg
Apollo 5642 2.jpg
Apollo 5642 3.jpg
Apollo 5642 4.jpg
Apollo 5642 5.jpg
Apollo 5642 6.jpg
Tek-RM35A-HV-Section.jpg | 5642s in a 535/RM35A HV Supply
</gallery>
 
[[Category:Diode tubes]]

Revision as of 09:28, 28 November 2018

Apollo 5642 tube

The 5642 is a directly-heated high-voltage rectifier tube. It has three flexible lead connections and is intended to be soldered into the circuit. The European type DY70 is very similar (with lower heater current).

It is used in the CRT cathode and post-deflection acceleration supplies in many Tektronix scopes. In typical CRT circuits, the filament/cathode leads of each 5642 have their own secondary winding on the HV transformer.

Tek part number: 154-0051-00, 154-0079-00

Key Specifications

Heater 1.25 V, 200 mA
Peak inverse volrage 10 kV
Peak plate current 250 μA

Links

Pictures