The vertical signal path of the 581 is the same as that of the 585. It uses the T581 CRT. Type 581 scopes with serial numbers up to 510 use an all-tube trigger circuit.
Starting at serial number 511, the 581 uses tunnel diode triggering.
A Type 581A was introduced later, and it is specified to have a bandwidth of 85 MHz instead of 100 MHz. The somewhat relaxed bandwidth specification improved CRT production yield which had been a problem when the scope was specified to 100 MHz.
The 580 series were the last Tektronix scopes to use distributed amplifiers for vertical deflection.
581 vertical output amp (distributed amplifier) driving CRT