Difference between revisions of "60"

From TekWiki
Jump to: navigation, search
(cat)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The '''Tektronix Type 60''' is a 1 MHz amplifier plug-in for [[560-series scopes]].   
+
The '''Tektronix Type 60''' is a single-channel 1 MHz amplifier plug-in for [[560-series scopes]].   
 
It was [[introduced in 1961]].   
 
It was [[introduced in 1961]].   
 +
It was renamed the [[2A60|Type 2A60]] at serial number 820.
  
 
It has a sensitivity switch with four calibrated positions: 0.05 V/div, 0.5 V/div, 5 V/div, and 50 V/div.
 
It has a sensitivity switch with four calibrated positions: 0.05 V/div, 0.5 V/div, 5 V/div, and 50 V/div.
 
The input impedance is 1 megohm in parallel with 47 pF.   
 
The input impedance is 1 megohm in parallel with 47 pF.   
The input connector is a [[Connectors#UHF|UHF connector]].
+
The input connector is a [[UHF connector]].
  
[[list of manuals that are needed|Manual needed]].
+
* [[Media:Tek type 60 irb.pdf|Tektronix Type 60/2A60 Instrument Reference Book (OCR, PDF)]]
  
 
<gallery>
 
<gallery>
Image:Tek type 60.jpg|From 1961 catalog.
+
Tek type 60 sn742 1.jpg
 +
Tek type 60 sn742 2.jpg
 +
Tek type 60 sn742 3.jpg
 +
Tek type 60 sn742 4.jpg
 +
Tek type 60.jpg|From 1961 catalog.
 
</gallery>
 
</gallery>
  

Latest revision as of 10:56, 8 November 2019

The Tektronix Type 60 is a single-channel 1 MHz amplifier plug-in for 560-series scopes. It was introduced in 1961. It was renamed the Type 2A60 at serial number 820.

It has a sensitivity switch with four calibrated positions: 0.05 V/div, 0.5 V/div, 5 V/div, and 50 V/div. The input impedance is 1 megohm in parallel with 47 pF. The input connector is a UHF connector.