6R1A: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(on limited demand list in 1971 catalog)
No edit summary
Line 12: Line 12:
* [http://w140.com/tek_6r1a_notes_ocr.pdf Tektronix 6R1A Notes (PDF)]
* [http://w140.com/tek_6r1a_notes_ocr.pdf Tektronix 6R1A Notes (PDF)]
}}
}}
The '''Tektronix Type 6R1A''' is a plug-in for the [[567]] oscilloscope. It replaced the [[6R1]].   
The '''Tektronix Type 6R1A''' is a plug-in for the [[567]] oscilloscope.
The 6R1A provides digital readout of time and voltage measurements
It replaced the [[6R1]].   
on waveforms. The 6R1A (and the 567 in general) is oriented toward sampling measurements.   
The 6R1A provides digital readout of time and voltage measurements on waveforms.
The 6R1A is a counter and a comparator. To digitize analog voltages, the counter and comparator
The 6R1A (and the 567 in general) is oriented toward sampling measurements.   
are used as a ramp-compare ADC. Card Q (Voltmeter) contains a 1 MHz crystal oscillator.
The 6R1A is a counter and a comparator.
To digitize analog voltages, the counter and comparator are used as a ramp-compare ADC.
Card Q (Voltmeter) contains a 1 MHz crystal oscillator.
The counters (Card A) are made of flip-flops made of [[2N1754]] Germanium PNP transistors.
The counters (Card A) are made of flip-flops made of [[2N1754]] Germanium PNP transistors.


Line 23: Line 25:
trace.  In the 6R1A, the horizontal position of the 0% zone can be set arbitrarily.   
trace.  In the 6R1A, the horizontal position of the 0% zone can be set arbitrarily.   


Internally, the 6R1A differs from the 6R1 in how its functions are implemented. The
Internally, the 6R1A differs from the 6R1 in how its functions are implemented.
6R1 uses about seven tunnel diodes while the 6R1A uses only two tunnel diodes. The  
The 6R1 uses about seven tunnel diodes while the 6R1A uses only two tunnel diodes.
6R1 uses several Nuvistor tubes. In the 6R1A many tubes were replaced by transistors.
The 6R1 uses several Nuvistor tubes.
Take for example the front end of the SIGNAL COMPARATOR board. In the 6R1 it uses two
In the 6R1A many tubes were replaced by transistors.
[[7586]] Nuvistor triodes. In the 6R1A it is two NPN transistors.
Take for example the front end of the SIGNAL COMPARATOR board.
In the 6R1 it uses two [[7586]] Nuvistor triodes.
In the 6R1A it is two NPN transistors.


The digital display of the Tektronix 6R1 is composed of four [[Burroughs B5092]] Nixie
The digital display of the Tektronix 6R1 is composed of four [[Burroughs B5092]] Nixie
Line 43: Line 47:
==Pictures==
==Pictures==
<gallery>
<gallery>
File:6r1a_front.JPG|Front
6r1a_front.JPG|Front
File:6r1a_left.JPG|Left
6r1a_left.JPG|Left
File:6r1a_right.JPG|Right
6r1a_right.JPG|Right
File:6r1a_top.JPG|Top
6r1a_top.JPG|Top
File:6r1a_bottom.JPG|Bottom
6r1a_bottom.JPG|Bottom
File:6r1a_rear.JPG|Rear
6r1a_rear.JPG|Rear
File:6r1a_card_a.JPG|Card A (counter)
6r1a_card_a.JPG|Card A (counter)
File:6r1a_card_a_back.JPG|Card A (counter)
6r1a_card_a_back.JPG|Card A (counter)
File:6r1a_card_b.JPG|Card B (div 1, 2, 5)
6r1a_card_b.JPG|Card B (div 1, 2, 5)
File:6r1a_card_b_back.JPG|Card B (div by 1, 2, 5)
6r1a_card_b_back.JPG|Card B (div by 1, 2, 5)
File:6r1a_card_f.JPG|Card F (upper-limit no-go)
6r1a_card_f.JPG|Card F (upper-limit no-go)
File:6r1a_card_f_back.JPG|Card F (upper-limit no-go)
6r1a_card_f_back.JPG|Card F (upper-limit no-go)
File:6r1a_card_g.JPG|Card G (lower-limit no-go)
6r1a_card_g.JPG|Card G (lower-limit no-go)
File:6r1a_card_g_back.JPG|Card G (lower-limit no-go)
6r1a_card_g_back.JPG|Card G (lower-limit no-go)
File:6r1a_card_h.JPG|Card H (limit light driver)
6r1a_card_h.JPG|Card H (limit light driver)
File:6r1a_card_h_back.JPG|Card H (limit light driver)
6r1a_card_h_back.JPG|Card H (limit light driver)
File:6r1a_card_i.JPG|Card I (div by 10)
6r1a_card_i.JPG|Card I (div by 10)
File:6r1a_card_i_back.JPG|Card I (div by 10)
6r1a_card_i_back.JPG|Card I (div by 10)
File:6r1a_card_j.JPG|Card J (analog display)
6r1a_card_j.JPG|Card J (analog display)
File:6r1a_card_j_back.JPG|Card J (analog display)
6r1a_card_j_back.JPG|Card J (analog display)
File:6r1a_card_m.JPG|Card M (master gate)
6r1a_card_m.JPG|Card M (master gate)
File:6r1a_card_m_back.JPG|Card M (master gate)
6r1a_card_m_back.JPG|Card M (master gate)
File:6r1a_card_n.JPG|Card N (signal comparator)
6r1a_card_n.JPG|Card N (signal comparator)
File:6r1a_card_n_back.JPG|Card N (signal comparator)
6r1a_card_n_back.JPG|Card N (signal comparator)
File:6r1a_card_o.JPG|Card O (0% zone)
6r1a_card_o.JPG|Card O (0% zone)
File:6r1a_card_o_back.JPG|Card O (0% zone)
6r1a_card_o_back.JPG|Card O (0% zone)
File:6r1a_card_p.JPG|Card P (memory)
6r1a_card_p.JPG|Card P (memory)
File:6r1a_card_p_back.JPG|Card P (memory)
6r1a_card_p_back.JPG|Card P (memory)
File:6r1a_card_q.JPG|Card Q (voltmeter)
6r1a_card_q.JPG|Card Q (voltmeter)
File:6r1a_card_q_back.JPG|Card Q (voltmeter)
6r1a_card_q_back.JPG|Card Q (voltmeter)
File:6r1a_rear_connector_inside.JPG|Rear Connector
6r1a_rear_connector_inside.JPG|Rear Connector


File:6r1a connectors to indicator unit.png|Connectors to Indicator Unit
6r1a connectors to indicator unit.png|Connectors to Indicator Unit
File:6r1a plug-in card connectors.png|Plug-in Card Connectors
6r1a plug-in card connectors.png|Plug-in Card Connectors
File:6r1a signal comparator schem.png|Signal Comparator
6r1a signal comparator schem.png|Signal Comparator
File:6r1a master gate schem.png|Master Gate
6r1a master gate schem.png|Master Gate
File:6r1a voltmeter schem.png|Voltmeter
6r1a voltmeter schem.png|Voltmeter
File:6r1a lower limit no-go schem.png|Lower Limit No-Go
6r1a lower limit no-go schem.png|Lower Limit No-Go
File:6r1a upper limit no-go schem.png|Upper Limit No-Go
6r1a upper limit no-go schem.png|Upper Limit No-Go
File:6r1a limit light driver schem.png|Limit Light Driver
6r1a limit light driver schem.png|Limit Light Driver
File:6r1a divide by 10.png|Divide By 10
6r1a divide by 10.png|Divide By 10
File:6r1a divide 1 2 5 schem.png|Divide By 1, 2, 5
6r1a divide 1 2 5 schem.png|Divide By 1, 2, 5
File:6r1a counter schem.png|Counter
6r1a counter schem.png|Counter
File:6r1a analog display schem.png|Analog Display
6r1a analog display schem.png|Analog Display
File:6r1a 0 percent zone schem.png|0 Percent Zone
6r1a 0 percent zone schem.png|0 Percent Zone
File:6r1a 0 and 100 memories schem.png|0 and 100 Percent Memories
6r1a 0 and 100 memories schem.png|0 and 100 Percent Memories
File:6r1a external readout connector j31.png|External Readout Connector J31
6r1a external readout connector j31.png|External Readout Connector J31
File:6r1a external programming connector j34.png|External Programming Connector J34
6r1a external programming connector j34.png|External Programming Connector J34
File:Tek_012-067_012-068_1964_cat.jpg|012-067_and 012-068 Extender Cards for Maintenance
Tek_012-067_012-068_1964_cat.jpg|012-067_and 012-068 Extender Cards for Maintenance
</gallery>
</gallery>


[[Category:560 series plugins]]
[[Category:560 series plugins]]

Revision as of 18:22, 3 February 2018

Template:Plugin Sidebar 2 The Tektronix Type 6R1A is a plug-in for the 567 oscilloscope. It replaced the 6R1. The 6R1A provides digital readout of time and voltage measurements on waveforms. The 6R1A (and the 567 in general) is oriented toward sampling measurements. The 6R1A is a counter and a comparator. To digitize analog voltages, the counter and comparator are used as a ramp-compare ADC. Card Q (Voltmeter) contains a 1 MHz crystal oscillator. The counters (Card A) are made of flip-flops made of 2N1754 Germanium PNP transistors.

The 6R1A differs sightly from the 6R1, mainly in what determines the 0% zone. In the 6R1, the 0% zone is always the leftmost major division of the trace. In the 6R1A, the horizontal position of the 0% zone can be set arbitrarily.

Internally, the 6R1A differs from the 6R1 in how its functions are implemented. The 6R1 uses about seven tunnel diodes while the 6R1A uses only two tunnel diodes. The 6R1 uses several Nuvistor tubes. In the 6R1A many tubes were replaced by transistors. Take for example the front end of the SIGNAL COMPARATOR board. In the 6R1 it uses two 7586 Nuvistor triodes. In the 6R1A it is two NPN transistors.

The digital display of the Tektronix 6R1 is composed of four Burroughs B5092 Nixie tubes for the digits, and one Burroughs B5094 Nixie tube for the units.

There is an extender plug-in, the 067-0505-00, that allows a 6R1 or 6R1A to be operated outside the plug-in bay of the 567 for maintenance purposes. There are extension cards, the 012-067 and 012-068 (shown below), that allow the circuit cards in the 6R1 to be accessed for maintenance while the instrument is powered up.

Specifications

please add

Pictures

  • Front

    Front

  • Left

    Left

  • Right

    Right

  • Top

    Top

  • Bottom

    Bottom

  • Rear

    Rear

  • Card A (counter)

    Card A (counter)

  • Card A (counter)

    Card A (counter)

  • Card B (div 1, 2, 5)

    Card B (div 1, 2, 5)

  • Card B (div by 1, 2, 5)

    Card B (div by 1, 2, 5)

  • Card F (upper-limit no-go)

    Card F (upper-limit no-go)

  • Card F (upper-limit no-go)

    Card F (upper-limit no-go)

  • Card G (lower-limit no-go)

    Card G (lower-limit no-go)

  • Card G (lower-limit no-go)

    Card G (lower-limit no-go)

  • Card H (limit light driver)

    Card H (limit light driver)

  • Card H (limit light driver)

    Card H (limit light driver)

  • Card I (div by 10)

    Card I (div by 10)

  • Card I (div by 10)

    Card I (div by 10)

  • Card J (analog display)

    Card J (analog display)

  • Card J (analog display)

    Card J (analog display)

  • Card M (master gate)

    Card M (master gate)

  • Card M (master gate)

    Card M (master gate)

  • Card N (signal comparator)

    Card N (signal comparator)

  • Card N (signal comparator)

    Card N (signal comparator)

  • Card O (0% zone)

    Card O (0% zone)

  • Card O (0% zone)

    Card O (0% zone)

  • Card P (memory)

    Card P (memory)

  • Card P (memory)

    Card P (memory)

  • Card Q (voltmeter)

    Card Q (voltmeter)

  • Card Q (voltmeter)

    Card Q (voltmeter)

  • Rear Connector

    Rear Connector

  • Connectors to Indicator Unit

    Connectors to Indicator Unit

  • Plug-in Card Connectors

    Plug-in Card Connectors

  • Signal Comparator

    Signal Comparator

  • Master Gate

    Master Gate

  • Voltmeter

    Voltmeter

  • Lower Limit No-Go

    Lower Limit No-Go

  • Upper Limit No-Go

    Upper Limit No-Go

  • Limit Light Driver

    Limit Light Driver

  • Divide By 10

    Divide By 10

  • Divide By 1, 2, 5

    Divide By 1, 2, 5

  • Counter

    Counter

  • Analog Display

    Analog Display

  • 0 Percent Zone

    0 Percent Zone

  • 0 and 100 Percent Memories

    0 and 100 Percent Memories

  • External Readout Connector J31

    External Readout Connector J31

  • External Programming Connector J34

    External Programming Connector J34

  • 012-067_and 012-068 Extender Cards for Maintenance

    012-067_and 012-068 Extender Cards for Maintenance

Retrieved from "https://w140.com/tekwiki/index.php?title=6R1A&oldid=30804"